Explore deals

Crl Sliding Glass Door Roller



 - CRL Sliding Glass Door Roller with 1-1/4
CRL Sliding Glass Door Roller with 1-1/4" Tandem Steel Wheels; 3/4" Wide

The adjustable steel housing assembly on the CRL Glass Door Roller is 3/4 inch (19.1 millimeter) wide and one inch (25.4 millimeter) high. The two steel ball bearing rollers are 1-1/4 inch (31.7 millimeter) in diameter. The top mounting hole is drilled but not tapped. The diameter is consistent for use with a # 10-24 self tapping screw, not included. This assembly is used by several Canadian glass door manufacturers. One roller per package.

  • Brand: CRL
  • ASIN: B01GWET8O6
  • UPC: 060829614352
 - CRL Sliding Glass Door Roller with 1-1/2
CRL Sliding Glass Door Roller with 1-1/2" Steel Wheel 3/4" Wide

This CRL Sliding Glass Door Roller Assembly has a 3/4 inch (19.1 millimeter) wide, 1-7/16 inch (36.5 millimeter) tall adjustable steel housing assembly. The assembly fits on doors by several patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B001G13EBO
  • UPC: 060829690622
 - CRL 8' Stainless Steel Large Patio Door Sill Cover 6702A8
CRL 8' Stainless Steel Large Patio Door Sill Cover

8' (2.4 m). Repairs Damaged or Corroded Patio Door Rails. Makes Doors Work as Good as New. Easy-to-Install Available in Lengths From 8' to 10' (2.4 to 3.0 m). Repair damaged or corroded patio door rails with easy-to-install CRL Sill Cover. Simply remove the door, place sill cover over rail, and then re-install the door. Stainless Steel Sill Cover allows patio doors to roll smoothly and quietly again. Available in two sizes that fit just about any patio door rail.NOTE: If existing track is extra small or worn you may want to apply a couple of inches of silicone into track cover at each end to prevent cover from lifting up at ends. Or by crimping the ends only with vise grip after installation will help cover stay on.

  • Brand: C.R. Laurence
  • ASIN: B00QL56SM2
  • UPC: 060829618619
 - CRL Sliding Glass Door Roller with 1-1/8
CRL Sliding Glass Door Roller with 1-1/8" Steel Wheel 1/2" Wide Housing for Better-Bilt

This CRL Sliding Glass Door Roller Assembly has a 1/2 inch (12.7 millimeter) wide, one inch (25.4 millimeter) tall adjustable steel housing assembly. The steel ball bearing roller is 9/32 inch (7.1 millimeter) wide. The assembly fits on Better-Bilt and many other patio doors. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B000L009LO
  • UPC: 060829811379
 - CRL 1-1/8
CRL 1-1/8" Steel Sliding Glass Door Roller With 9/16" Wide Housing -

This CRL Sliding Glass Door Roller Assembly has a 9/16 inch (14.2 millimeter) wide, 1-1/16 inch (27 millimeter) tall adjustable steel housing assembly. The steel ball bearing roller is 1-1/8 inch (28.6 millimeter) in diameter. The assembly is used by many patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B006JFMMB0
 - CRL 1-1/4
CRL 1-1/4" Tandem Steel Ball Bearing Roller Assembly for Andersen

This CRL Sliding Glass Door Tandem Roller Assembly has a side adjustable steel housing. The assembly fits on doors by Andersen patio doors. Each package contains one roller assembly.

  • Brand: C. R. Laurence Co., Inc.
  • ASIN: B00O900H1E
  • UPC: 060829508491
 - Prime-Line Products D 1980 Sliding Door Tandem Roller Assembly with 1-Inch Steel Ball Bearing End Adjustable
Prime-Line Products D 1980 Sliding Door Tandem Roller Assembly with 1-Inch Steel Ball Bearing End

This patio door roller is constructed from steel and has tandem rollers with a diameter of 1-1/4 in. It comes affixed to an adjustable steel housing assembly. This roller is used on vinyl or wood patio doors.

  • Brand: PRIME-LINE
  • ASIN: B00DPH93VW
  • UPC: 735090525729
 - CRL Sliding Glass Door Roller with 1-1/2
CRL Sliding Glass Door Roller with 1-1/2" Tandem Nylon Wheels; 11/16" Wide

This very popular CRL Tandem Sliding Glass Door Roller features a steel housing assembly with screw hole tabs which are 5-3/4 inch (146.1 millimeter) on center. The unit is 11/16 inch (17.5 millimeter) wide and 1-3/16 inches (30.2 millimeters) high. The nylon ball-bearing rollers are 1-1/2 inches (38.1 millimeters) in diameter. One roller per package.

  • Brand: CRL
  • ASIN: B00O8ZW1ZK
 - CRL Sliding Glass Door Roller with 1-1/2 Steel Wheel 1/2
CRL Sliding Glass Door Roller with 1-1/2 Steel Wheel 1/2" Wide Housing for Ador/HiLite

C.R. LAURENCE D1585 CRL 1-1/2" Steel Sliding Glass Door Roller with 1/2" Wide Housing for Ador/HiLite Doors. This CRL Sliding Glass Door Roller Assembly has a 1/2" (12.7 mm) wide steel bracket. The steel ball bearing roller is 5/16" (7.9 mm) wide. The assembly is used with D1685 to replace the inner roller assembly and fits on doors by Ador/HiLite and many other patio door manufacturers. Each package contains one roller assembly.. Part Numbers Variations: D1585

  • Brand: C.R. Laurence
  • ASIN: B00QL4YQ9U
  • UPC: 060829930162
 - Prime-Line D 1579-1 Sliding Door Repair Track - Repair Worn or Damaged Sliding Glass Door Aluminum Tracks and Horizontal Sliding Window Tracks, 1/4
Prime-Line D 1579-1 Sliding Door Repair Track - Repair Worn or Damaged Sliding Glass Door Aluminum Tracks and Horizontal Sliding Window Tracks, 1/4" x 8', Stainless

This stainless steel patio door track cover can be used to repair worn or damaged sliding glass door aluminum tracks, making opening a tricky door a breeze. It can also be used as a repair part for horizontal sliding window tracks. Installation is quick and easy – the repair track simply snaps over the old track and is attached with silicone adhesive (not included). The patio door track cover measures ¼” wide and 8 feet long, but can be cut to any length to fit your door or window. For more information and installation tips, watch the instructional video featured on this page.

  • Brand: PRIME-LINE
  • ASIN: B00DPH7HGK
  • UPC: 049793915795
 - CRL 1-1/2
CRL 1-1/2" Steel Sliding Glass Door Roller With 3/4" Wide Housing for Ador/HiLite Doors -

This CRL Sliding Glass Door Roller Assembly has a 3/4 inch (19.1 millimeter) wide adjustable steel housing assembly. The steel ball bearing roller is 5/16 inch (7.9 millimeter) wide. The assembly fits on Ador/HiLite series 1200 doors. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B000KZY5UG
  • UPC: 060829519244
 - CRL 1-1/2
CRL 1-1/2" Pella Glass Door Roller by CR

This CRL Sliding Glass Door Roller fits doors made by the Pella Company from 1960 to present. The housing measures 11/16 inch (17.5 millimeter) wide, 1-11/16 inch (42.9 millimeter) tall, and has a 1-1/2 inch (38.1 millimeter) diameter steel ball bearing roller with an extra wide 11/32 inch (8.7 millimeter) groove.

  • Brand: CRL
  • ASIN: B006JFP78A
  • UPC: 060829564428
 - CRL 1-1/2
CRL 1-1/2" Tandem Steel Sliding Glass Door Roller With 3/4" Wide Housing -

This CRL Sliding Glass Door Tandem Roller Assembly has a 3/4 inch (19 millimeter) wide, 1-9/16 (39.7 millimeter) tall adjustable steel housing assembly. The assembly fits on doors by several patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B001G17PW8
  • UPC: 060829505735
 - CRL 1-1/4
CRL 1-1/4" Steel Sliding Glass Door Roller With 13/16" Wide Housing for Acorn & Wells Aluminum Doors -

This CRL Glass Door Roller has a 1-1/4 inch (38.1 millimeter) steel ball bearing wheel with center groove. The adjustable steel housing is 13/16 inch (20.6 millimeter) wide. The roller fits on doors by Acorn and Wells Aluminum. One roller per package.

  • Brand: CRL
  • ASIN: B00O8ZP1J8
  • UPC: 060829317482
 - CRL Sliding Glass Door Roller with 1-1/4
CRL Sliding Glass Door Roller with 1-1/4" Nylon Wheel 11/16" Wide Housing for Trimview

This CRL Sliding Glass Door Roller Assembly has a diecast housing which is 11/16 inch (17.5 millimeter) wide and one inch (25.4 millimeter) tall. The nylon ball bearing roller is 1-1/4 inch (31.8 millimeter) in diameter. This roller unit fits on Trimview and many other manufacturers doors. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B000L009NC
  • UPC: 060829471924
 - Small Sill Track Cover - 72 in long
Small Sill Track Cover - 72 in

C.R. LAURENCE 6701A6 CRL 6 Foot Small Sill Track Cover. Repair damaged or corroded patio door track with easy to install CRL Sill Track Cover. Simply remove the door, and snap the sill cover over the damaged track and re-install the door. The door rollers will slide smoothly and quietly as though brand new.. Part Numbers Variations: 6701A6

  • Brand: C.R. Laurence
  • ASIN: B01LYHSBRC
 - CRL 1-1/4
CRL 1-1/4" Steel Sliding Glass Door Roller With 7/8" Wide Housing for Peachtree Doors Bulk 10 Pack -

This popular CRL Sliding Glass Door Roller is packaged in bulk 10 packs in order to save you time and money. By buying in bulk you not only save on the cost per unit, but also insure that you have the rollers in stock when you need them. The roller assembly has a 1-1/4 inch (31.8 millimeter) steel ball bearing roller. The adjustable steel housing assembly is 7/8 inch (22.2 millimeter) wide and 1-9/16 inches (39.7 millimeter) tall. This unit fits on Peachtree doors. Ten rollers per package.

  • Brand: CRL
  • ASIN: B00O8ZMMNQ
 - Prime-Line Products D 1579-C Track Repair Cap, 4' (2 Pieces), Stainless Steel, 3/16
Prime-Line Products D 1579-C Track Repair Cap, 4' (2 Pieces), Stainless Steel, 3/16" x 4Ft. x 1/4

This patio door track cover is constructed from stainless steel. It is used as a repair part for damaged or badly worn tracks. This track includes two (2) 4 ft. Sections that can be cut to any length to fit your door.

  • Brand: PRIME-LINE
  • ASIN: B01AOHYC3O
  • UPC: 049793215796
 - CRL 1-1/2
CRL 1-1/2" Steel Sliding Glass Door Roller with 3/4" Wide x 1-7/16" High Housing

This CRL Sliding Glass Door Roller Assembly has a 3/4 inch (19.1 millimeter) wide, 1-7/16 (36.5 millimeter) tall adjustable steel housing assembly. The steel ball bearing roller is 5/16 inch (7.9 millimeter) wide. The assembly fits on doors by many patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B00O8ZPVZW
 - CRL 1-1/2
CRL 1-1/2" Steel Ball Bearing Sliding Glass Door Roller with 3/4" Wide Housing -

This CRL Sliding Glass Door Roller Assembly has a 3/4 inch (19 millimeter) wide, 1-3/16 inch (30.2 millimeter) tall adjustable steel housing assembly. The steel ball bearing roller is 5/16 inch (7.9 millimeter) wide. The assembly fits on doors used by many patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B001G17RTE
 - CRL 1-1/4
CRL 1-1/4" Tandem Stainless Steel Ball Bearing Sliding Glass Door Roller With 11/16" Wide Housing for Pacific Doors -

This CRL All Stainless Steel Sliding Glass Door Roller gives superior corrosion resistance. This roller housing design is one of the most popular tandem housings in production today. Primarily used by Pacific Patio, however this housing will fit several brands of doors. The housing measures 11/16 inches (17.5 millimeter) wide and 1-1/16 inches (26.7 millimeter) in height with twin 1-1/4 inches (31.8 millimeter) diameter stainless steel ball-bearing rollers. One roller per package.

  • Brand: CRL
  • ASIN: B00O8ZTCIE
  • UPC: 060829460645
 - CRL Sliding Glass Door Roller with 1-1/4
CRL Sliding Glass Door Roller with 1-1/4" Steel Wheel 5/8" Wide Housing for Smith Carry

This CRL Sliding Glass Door Roller Assembly has a 5/8 inch (14.3 millimeter) wide, one inch (25.4 millimeter) tall adjustable steel housing assembly. The steel ball bearing roller is 5/16 inch (7.9 millimeter) wide. The assembly fits on doors by Smith Carry and many other patio door manufacturers. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B000L009XC
  • UPC: 060829888432
 - Sliding Glass Door Roller, 1-1/4
Sliding Glass Door Roller, 1-1/4" Steel Wheel, 9/16" Wide Housing for Acorn

This CRL Sliding Glass Door Roller Assembly has a 9/16 inch (14.3 millimeter) wide, one inch (25.4 millimeter) tall adjustable steel housing assembly. The assembly fits on Acorn Doors and many other patio doors. Each package contains one roller assembly.

  • Brand: CRL
  • ASIN: B000KZX1CO
 - CRL 1-1/4
CRL 1-1/4" Stainless Steel Sliding Glass Door Roller - Fits Milgard8482;

This CRL Stainless Steel Sliding Glass Door Tandem Roller Assembly fits doors made by Milgard, and features a 11/16" (17 mm) wide, 1-11/16" (42.9 mm) tall adjustable stainless steel housing assembly that encloses stainless steel rollers. The assembly is designed to be used in severe weather environments. Each package contains one roller assembly.

  • Brand: CR Laurence
  • ASIN: B0719MF4J6
 - Zipper Pile Weatherstrip .187
Zipper Pile Weatherstrip .187" Backing - .250" Pile Height - 100'

CRL Zipper Pile Weatherstrip is a full density, high performance, water-resistant pile woven to a unique zipper tooth design polypropylene backing. The zipper tooth design allows the pile to easily snap into the extrusion slot from above rather than having to slide the pile in from the ends. Whether it's being used in manufacturing or retrofitted, the application is much easier and faster. It even works if the slot is slightly off size. Zipper Pile can be used to retrofit aluminum, vinyl, fiberglass or wood T-slots without the need to take the complete window or door sash apart. The double center fin provides a true weather seal, compared to other piles without a fin suited for vibration reduction and pest control only.

  • Brand: CR Laurence
  • ASIN: B00D0RIR6E
  • UPC: 733353279853

Get a Great Deal on Crl Sliding Glass Door Roller.‎

Looking for more Crl Sliding Glass Door Roller similar ideas? Try to explore these searches: Formal Tuxedo Suit, 14 Color Monitor, and Monza 3 Light.


           

CRL DRS Door Rail System

Crl Sliding Glass Door Roller

This video will give you step-by-step instructions on how to easily install the C.R. Laurence DRS Door Rail System for all-glass entrances. The DRS Door Rail System features our patented Wedge-Lock® glass securing system. Wedge-Lock works by applying pressure evenly along both sides of the glass ...

Tags: CRL,C.R. Laurence,Door Rails,All Glass Entrance...

CRL Weatherstile Kits for Glass Doors

Crl Sliding Glass Door Roller

CRL Vertical Weatherstile Kits include lengths of Weatherstile with Wool Pile Weatherstrip, EPDM Filler Strip (for double door applications), four Bonding Strips with Very Hi-Bond Tape, Weatherstripped Removable Access Plates with Alignment Clips, and installation instructions. Custom lengths up ...

Tags: crl,c.r. laurence,us aluminum,weatherstile,kits...

CRL Essence Series Headerless Sliding Shower Door System

Crl Sliding Glass Door Roller

More Glass and Less Metal! CRL's new Essence Series Sliding Shower Door System allows a headerless appearance by utilizing a bottom rolling system that includes an anti-derail/anti-pinch guard feature. The bottom rollers also have an integrated height adjustment for door to vertical jamb alignme...

Tags: essence,series,shower,door,frameless,glass,bath...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.