Explore deals

Flat Cold Chisel



 - Stanley 16-298 3 Piece Cold Chisel Kit
Stanley 16-298 3 Piece Cold Chisel

PO16-298 Features: -Cutting edge is hardened to 52-58 HRC and is ground to a precise angle for efficient cutting and durability. -Striking edge hardened to 42 HRC and has chamfered edges to help resist chipping. -Size marking on shank allows for easy identification of the tool. -3 piece set contains one 16-286 - 3/8'' x 5-9/16'', one 16-287 - 1/2'' x 6'' and one 16-288 - 5/8'' x 6-3/4''. Product Type: -Chisels. Dimensions: Overall Length - Top to Bottom: -2.6 Inches. Overall Width - Side to Side: -0.9 Inches. Overall Depth - Front to Back: -9.3 Inches. Overall Product Weight: -0.76 Pounds.

  • Brand: Stanley
  • ASIN: B000NIFB94
  • UPC: 076174162981
 - Dasco G337 12-Inch by 1.25-Inch Flat Utility Chisel with TargetGuard
Dasco G337 12-Inch by 1.25-Inch Flat Utility Chisel with

The Dasco Pro cold chisel with target guard is designed for shearing nuts, bolts, rivets and other materials. Its large target head striking area reduces mushrooming and protects hands from missed hits.

  • Brand: DASCO
  • ASIN: B00EDLXS9M
  • UPC: 743153361146
 - KSEIBI 283570 Cold Chisels (Flat Shank) with Soft Grip Handle 12 Inch length
KSEIBI 283570 Cold Chisels (Flat Shank) with Soft Grip Handle 12 Inch

Maintenance: A dull cutting edge may be sharpened using a common file as described in our "Maintenance" section below: 1. Always wear safety goggles when sharpening a cutting edge and when ever using a striking tool.2. Rigidly support the tool being sharpened. Secure in a bench vise if possible.3. Never use grinding to sharpen. This causes excessive heat and may result in a loss of strength, durability and temper.4. Instead, use a file or stone of medium or fine grit and file away from the cutting edge. This directs heat away from the edge.5. The original contour of the cutting edge or point should be restored. Flat cold chisels should be restored to a bevel angle about 70 degrees. Note: Always strike the chisel with a light, cautious blow when starting a job to determine the relative hardness of the metal to be cut. Always wear safety goggles when using a cold chisel as well as when using all struck hand tools.. From Factory: The chisel has a cutting edge at one end, and a struck face at the other to be struck with a ball-peen or machinists hammer. Never strike with a nail hammer and never strike anywhere except the struck face.

  • Color: Black
  • Brand: KSEIBI
  • ASIN: B06Y54MFH4
 - Rennsteig SDS Max Flat Cold Chisel 24-Inch - Tip Width 1.0-Inch
Rennsteig SDS Max Flat Cold Chisel 24-Inch - Tip Width

Fits in all SDS Max machines. - Length 600 mm (similar to 24 inch) - Diameter 18 mm (similar to 0.7 inch) - Tip width 25 mm (similar to 1.0 inch) - Weight 2.43 lbs. RENNSTEIG offers a full assortment of high quality SDS Max Chisels. - For removing plaster from walls and floors. - Ideal for scraping and cleaning surfaces for demolition work. - Removal of heavy rust layers. - For hard materials, for general chiselling and demolition work of masonry, concrete and loose stones. - Gives a well-directed breaking off effect. Each chisel comes separately packed in a nice plastic tube. Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B0085V16ZY
 - MONTSTAR Cold Mason Chisel Flat Head | Masons Chisel with Hand Protector 16mm x 14
MONTSTAR Cold Mason Chisel Flat Head | Masons Chisel with Hand Protector 16mm x

Forged from high quality carbon steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening.Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. hand guards for

  • Brand: MONTSTAR
  • ASIN: B01DSRJFJI
 - Eclipse CB150E Flat Cold Chisel, Chrome Vanadium Steel, 1
Eclipse CB150E Flat Cold Chisel, Chrome Vanadium Steel, 1" Width x 8"

Flat chisel for general cutting and chipping of metals, and for shaping, facing and cutting of stonework.

  • Brand: Eclipse
  • ASIN: B0043YFZN6
 - Williams C-120 X-Long Cold Chisel, 5/8-Inch Flat
Williams C-120 X-Long Cold Chisel, 5/8-Inch

Heavy duty construction for strength and durability. For cutting, shaping and removing metal softer than the cutting edge of the chisel.

  • Brand: Williams
  • ASIN: B00HQDNDRQ
  • UPC: 662459284341
 - ABN Cold Chisel Set Automotive Punch Tool Kit – 29-Piece Punch Chisel Set – Pin Punch Set, Center Punch Set, More
ABN Cold Chisel Set Automotive Punch Tool Kit – 29-Piece Punch Chisel Set – Pin Punch Set, Center Punch Set,

Cut, shape, and remove metal, remove pins, rivets, and keys, drive pins or bolts from force fit holes, and more with the ABN Chisel Punch Set. The punches and chisels in this kit can be used to work on all hard materials and are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity. This cold chisel and punch set includes 7 pin punches (3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"), 6 starter punches (3/32", 1/8", 5/32", 3/16", 1/4", 5/16"), 4 center punches (1/4", 5/16", 3/8", 1/2"), 7 flat chisels (1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"), 2 cape/slot chisels (1/4" and 5/16"), 2 diamond point chisels (5/16" and 3/8"), and 1 half-round nose chisel (5/16") all packed inside a roll-up pouch for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: ABN
  • ASIN: B07DVPC61S
  • UPC: 811498033896
 - Rennsteig SDS Max Flat Cold Chisel 11-Inch - Tip Width 1.0-Inch
Rennsteig SDS Max Flat Cold Chisel 11-Inch - Tip Width

Fits in all SDS Max machines. - Length 280 mm (similar to 11.0 inch) - Diameter 18 mm (similar to 0.7 inch) - Tip width 25 mm (similar to 1.0 inch) - Weight 0.99 lbs. RENNSTEIG offers a full assortment of high quality SDS Max Chisels. - For removing plaster from walls and floors. - Ideal for scraping and cleaning surfaces for demolition work. - Removal of heavy rust layers. - For hard materials, for general chiselling and demolition work of masonry, concrete and loose stones. - Gives a well-directed breaking off effect. Each chisel comes separately packed in a nice plastic tube. Rennsteig chisels are manufactured to the highest standards and lowest tolerances possible, designed for durability and efficiency. They are used for concrete work by homeowners as well as professionals. Rennsteig carrys shanks for a wide range of hammers, they offer tools for SDS max, SDS plus and many other popular shank styles. Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B0085V14EW
 - Ankoow 6 Pieces CR-V Alloy Steel Pro Punch and Chisel Set with Pin Punch, Tapered Punch, Center Punch and Cold Chisel for Brickwork, Concrete, Metal and Stone
Ankoow 6 Pieces CR-V Alloy Steel Pro Punch and Chisel Set with Pin Punch, Tapered Punch, Center Punch and Cold Chisel for Brickwork, Concrete, Metal and

Specifications: Material:CR-V Alloy Steel Color:Yellow and Silver Size: Total Length x Diameter x Part Length (1)200mmx16mmx19mm (2)175mmx13mmx16mm (3)165mmx10mmx12mm (4)150mmx10mmx4mm (5)150mmx10mmx4mm (6)150mmx10mmx3mm Packing Included: 6 x Punch and Chisel Set1 x Roll-up storage pouch

  • Brand: Ankoow
  • ASIN: B07CGLQ4DC
  • UPC: 700516313365
 - Teng Tools 25 x 250mm Specialist Hardened Steel Flat Cold Chisel - CC250F
Teng Tools 25 x 250mm Specialist Hardened Steel Flat Cold Chisel -

Specialist steel flat cold chisel, hardened for long life.

  • Brand: Teng Tools
  • ASIN: B00CYLWQ4G
 - Rennsteig SDS Max Chisel Set (1x Flat Cold Chisel, 1x Bull Point Chisel, 1x Spade/Scaling Chisel)
Rennsteig SDS Max Chisel Set (1x Flat Cold Chisel, 1x Bull Point Chisel, 1x Spade/Scaling

Fits in all SDS Max machines. Set includes: - 1x P/N 210 40000 - Flat Cold Chisel 400 mm (similar to 15 inch) - Tip width 1 inch - 1x P/N 210 40001 - Pointed Chisel 400 mm (similar to 15 inch) - 1x P/N 210 40002 - Spade (Scaling) Chisel 400 mm (similar to 15.8 inch) - Tip Width 2.0 inch - Weight 2.09 lbs. RENNSTEIG offers a full assortment of high quality SDS Max Chisels. 100% Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B009WNYR2S
 - Rennsteig SDS Plus Flat Cold Chisel - Tip Width 1-Inch
Rennsteig SDS Plus Flat Cold Chisel - Tip Width

Fits in all SDS Plus machines. - SDS plus Chisel for electric rotary hammers specially designed for durability and efficiency - Ground tip, fully tempered and laser engraved, exact chuck fir - For general-purpose chipping and demolition works in brickwork, concrete and rock - For removing plaster from walls and floors - Removal of heavy rust layers - Gives a well-directed off effect - Length 250 mm (similar to 10 inch) - Diameter 14 mm (similar to 0.6 inch) - Tip width 20 mm (similar to 1 inch) - Weight 0.59 lbs. RENNSTEIG offers a full assortment of high quality SDS Plus Chisels. Each chisel comes separately packed in a nice plastic tube. Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B0085V17D0
 - Williams C-126 X-Long Cold Chisel, 3/4-Inch Flat
Williams C-126 X-Long Cold Chisel, 3/4-Inch

Heavy duty construction for strength and durability. For cutting, shaping and removing metal softer than the cutting edge of the chisel.

  • Brand: Williams
  • ASIN: B007YRDTX2
  • UPC: 662459284372
 - Century Drill and Tool 72396 Flat Cold Chisel, 3/8-Inch
Century Drill and Tool 72396 Flat Cold Chisel,

Century Drill & Tool's flat cold chisel is made from single piece construction forged from chrome vanadium steel. The chisel is designed for cutting through nails, bolts and rivets.

  • Brand: Century Drill & Tool
  • ASIN: B0058I1DUU
  • UPC: 081838723965
 - Makita 7 Piece - SDS-Plus Drill, Chisel & Bull Point Bit Set For SDS+ Rotary Hammers - Aggressive Demolition For Concrete & Masonry
Makita 7 Piece - SDS-Plus Drill, Chisel & Bull Point Bit Set For SDS+ Rotary Hammers - Aggressive Demolition For Concrete &

Our Exclusive Complete Makita 7 Piece SDS+ Drilling, Chisel & Demolition Set with Makita's Carbide tip & hardened cold steel forged bits provide unmatched DURABILITY, PERFORMANCE AND RELIABILITY for concrete and masonry drilling, demolition and surface conditioning. Special flute design clearing out debris for fast, efficient drilling. Strengthened carbide tips for longer bit life Included with this set: 1 Flat Chisel of 10" Long x 0.78" Wide + 1 Bull Point 10" Long, (3/16" x 4-1/2"), (1/4" x 6-1/4"), (5/16" x 6-1/4"), (3/8" x 6-1/4"), and (1/2" x 6-1/4") Bit. Includes a sturdy and convenient 5-Piece SDS-Plus drill bit case and 2 Chisel & Bull Point Bits with their own protective sleeves.

  • Color: Silver & Red
  • Brand: Makita
  • ASIN: B01FZRVCQI
  • UPC: 692193801856
 - Williams C-132 X-Long Cold Chisel, 7/8-Inch Flat
Williams C-132 X-Long Cold Chisel, 7/8-Inch

Heavy duty construction for strength and durability. For cutting, shaping and removing metal softer than the cutting edge of the chisel.

  • Brand: Williams
  • ASIN: B007YRDUC2
  • UPC: 662459284389
 - Williams C-125 X-Long Cold Chisel, 3/4-Inch Flat
Williams C-125 X-Long Cold Chisel, 3/4-Inch

Heavy duty construction for strength and durability. For cutting, shaping and removing metal softer than the cutting edge of the chisel.

  • Brand: Williams
  • ASIN: B007YRDTLE
  • UPC: 662459284365
 - Rennsteig Premium 5 Piece Punch & Chisel Set with Hand Guard
Rennsteig Premium 5 Piece Punch & Chisel Set with Hand

Tool Set 6 pieces in plastic standPremium Lifetime Chisels and Punches Set includes: - 1 Flat cold chisel 150 mm (6") length (P/N 312 150 0) - 1 Flat cold chisel 125 mm (5") length (P/N 312 125 0) - 1 Crosscut chisel 125 mm (5") length (P/N 322 125 0) - 1 Center punch (P/N 430 120 0), 3/8" - 1 Starter (Taper punch) (P/N 440 003 0), point size Ø 3 mm (similar 1/8") - 1 Starter (Taper punch) (P/N 440 004 0), point size Ø 4 mm (similar 5/32") These are industrial tools, not DIY-quality items.

  • Brand: Rennsteig
  • ASIN: B0085V5S8K
 - GreatNeck 501C Flat Cold Chisel, 5-Inch x 5/16 Inch
GreatNeck 501C Flat Cold Chisel, 5-Inch x 5/16

The 5 x 1/4 inch Flat Cold Chisel by Great Neck is ideal for cutting, shaping and removing metal. It is constructed from drop forged steel for strength and durability and is heat treated and tempered. Includes a cushioned grip cover for safety.

  • Brand: Great Neck
  • ASIN: B004FELO1G
  • UPC: 076812008329
 - Rennsteig SDS Plus Flat Cold Chisel - Tip Width 1.6-Inch
Rennsteig SDS Plus Flat Cold Chisel - Tip Width

Fits in all SDS Plus machines. - SDS plus Chisel for electric rotary hammers specially designed for durability and efficiency - Ground tip, fully tempered and laser engraved, exact chuck fir - For general-purpose chipping and demolition works in brickwork, concrete and rock - For removing plaster from walls and floors - Removal of heavy rust layers - Gives a well-directed off effect - Length 250 mm (similar to 10 inch) - Diameter 14 mm (similar to 0.6 inch) - Tip width 40 mm (similar to 1.6 inch) - Weight 0.71 lbs. RENNSTEIG offers a full assortment of high quality SDS Plus Chisels. Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B009NDF7HG
 - GEDORE Flat Cold Chisel
GEDORE Flat Cold Chisel

GEDORE 8699610 Flat Cold Chisel, 225 mm x 23 mm x 13 mm Acc. to DIN 6453 Chrome-molybdenum-vanadium air hardening steel 45CrMoV7 Carefully hardened and tempered along the full length

  • Brand: Gedore
  • ASIN: B000UYX12U
 - MINTCRAFT JL-3CSL3L 1 1 1 Cold Chisel Set, 3-Piece
MINTCRAFT JL-3CSL3L 1 1 1 Cold Chisel Set,

MINTCRAFT JL-3CSL3L COLD CHISEL SET 3PC. Chrome alloy steel material; drop forged, heat treated, baked enamel finish; heavy duty; hex shank; set contains: (1) 5/16" x 5", (1) 5/8" x 6-1/2" and (1) 3/4" x 7".

  • Brand: Mintcraft
  • ASIN: B002UGWIYI
  • UPC: 045734983014
 - Hand Guarded Chisel Set, 5 Pieces
Hand Guarded Chisel Set, 5

' Hand Guarded Chisel Set, Standard Tool (Accessory Needed for Tethering), Number of Pieces 5, Sizes Included Cold-1 In., Flat Utility-1-1/4 In., Electrician-2-3/4 In., Mason-2-1/4, 2-3/4 In., Brick-3 In., 1-Piece Design, Material Heat Treated High Carbon Steel, Features Hand Guard '

  • Brand: Dasco Pro
  • ASIN: B00AM1Z0EI
  • UPC: 094721093502
 - GreatNeck 505C Flat Cold Chisel, 6 x 3/8 Inch
GreatNeck 505C Flat Cold Chisel, 6 x 3/8

The 6 x 3/8 inch Flat Cold Chisel by Great Neck is ideal for cutting, shaping and removing metal. It is constructed from drop forged steel for strength and durability and is heat treated and tempered. Includes a cushioned grip cover for safety.

  • Brand: Great Neck
  • ASIN: B000FPAIJS
  • UPC: 076812008343

Get a Great Deal on Flat Cold Chisel.‎

Looking for more Flat Cold Chisel similar ideas? Try to explore these searches: Ibook Power Cord, Delta Biscuit Waterfall, and Red Sports Car.


           

What is a cold chisel.

Flat Cold Chisel

Quick view of what a cold chisel is and how to use it.

Tags:

Blacksmithing for Beginners - Understanding Cold Chisels

Flat Cold Chisel

Blacksmithing for Beginners - Understanding Cold Chisels. Here I describe the types of cold chisels I use to shape metal. Forging and heat treating carbon steel heat treating 1 https://youtu.be/ZYO06j9Lgg8 heat treating 2 https://youtu.be/k1PMN2IGsZ0 heat treating 3 https://youtu.be/llRi...

Tags: blacksmithing for beginners,blacksmithing,wroug...

CHISEL AND TYPES (हिन्दी )!LEARN AND GROW

Flat Cold Chisel

On this channel you can get education and knowledge for general issues and topics

Tags:

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.