Explore deals

High Speed Taper Shank Drill



 - Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16
Drill America DWDTS Series High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, 3 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 1-1/16" Size (Pack of

Drill America DWDTS series High-Speed Steel taper shank drill bit. Made to fit morse tapered holders. Designed to perform in a broad range of materials in the iron and steel families. It has a black oxide surface treatment that is abrasion resistant, reduces chip welding and improves chip flow. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

  • Brand: Drill America
  • ASIN: B00FXJ45XG
  • UPC: 887861048552
 - Dormer A95212.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 12 mm Head Diameter, 260 mm Flute Length, 395 mm Full Length
Dormer A95212.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 12 mm Head Diameter, 260 mm Flute Length, 395 mm Full

Allows greater drilling depths in one pass. Bright finish in flutes improves chip flow for soft or non-ferrous materials.

  • Brand: Dormer
  • ASIN: B01KRZ0K4S
 - Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 1
Chicago Latrobe 110 High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 1"

Chicago Latrobe Taper Shank Drill Bit - Drill Size 1.0000", Flute Length 6-3/8", Overall Length 11", Material Type - HSS, Point Angle - 118 Degree, Finish/Coating: Black Oxide

  • Brand: Chicago Latrobe
  • ASIN: B000LDBUV4
  • UPC: 662355531648
 - Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1
Cleveland 2410 High Speed Steel Taper Shank Drill Bit, Black Oxide, #3 Morse Taper Shank, 135 Degree Split Point, 1" Dia. x 11" Lg (Pack of

Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.

  • Brand: Cleveland
  • ASIN: B00074ZRQQ
  • UPC: 697334122500
 - Migiwata HSS Metric Hex Shank High Speed Steel Spiral Flute 2-in1 Combination Drill and Tap Bit Set M3-M10 with 1/4” Hex Shank Set of 6pcs
Migiwata HSS Metric Hex Shank High Speed Steel Spiral Flute 2-in1 Combination Drill and Tap Bit Set M3-M10 with 1/4” Hex Shank Set of

OVERVIEW Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic and other soft materials. They are not suitable for drill and tap in metals. These drill taps are a great time saving accessory. Each one is a combination of a twist drill bit and a tap. The point is the same as a twist drill bit, which is self-centering. So, you don't have to buy a centering drill bit or a center punch. Now you can drill and tap at the same time in one operation. No tool changes, good alignment and fast cycle times make this a very productive tool. This Migiwata high-speed steel (HSS 4341) drill/tap combination bit set are offered in a set of 6 different metric sizes (M3, M4, M5, M6, M8 and M10). TECHNICAL DETAILS Material: High Speed Steel 4341 Tapping Material Type: Wood, Plastic, etc. Tapping Material Thickness: About 5mm Point Type: 135 Degree Split Point Shank: 6.35mm (1/4") Quick Change Hex NOTICE: It's highly recommended that the combination drill and tap bit is used on a tapping machine. If you apply an electric hand drilling machine to do the tapping job, please pay attention to your operating, because excessive shaking and tilting may affect the result and even break the bit. CAUTION: Any cutting tool may break or shatter under...

  • Color: Sliver Metric
  • Brand: Migiwata
  • ASIN: B07122KD34
  • UPC: 610521863062
 - Dormer A95217.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 17 mm Head Diameter, 295 mm Flute Length, 445 mm Full Length
Dormer A95217.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 17 mm Head Diameter, 295 mm Flute Length, 445 mm Full

Allows greater drilling depths in one pass. Bright finish in flutes improves chip flow for soft or non-ferrous materials.

  • Brand: Dormer
  • ASIN: B01KRZ0SR2
 - MaxTool 3/4
MaxTool 3/4" Twist Drill Bits with Morse Taper Shank; Quality High Speed Steel M2; Black Oxide; 118 Deg Conventional Chisel; MT No2;

Taper Shank Drills are ideal for general applications. Quality high speed steel M2 ensures sharp and fast execution in any material, and offers a combination of hardness, toughness and wear resistance. Premium Heat treated is durable and can withstand heavy duty operation for a long tool life. Black Oxide Surface Treatment holds up lubricant better for smoother drilling. Morse taper shank allows the drills to be installed directly into the machine's spindle to facilitate high-torque applications. Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moreMaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwi...

  • Color: Black Oxide
  • Brand: MaxTool
  • ASIN: B079QDGHF9
  • UPC: 634301935381
 - Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #4 Morse Taper Shank, 135 Degree Split Point, 1 7/8
Cleveland 2411 High Speed Steel Undersized Taper Shank Drill Bit, Black Oxide, #4 Morse Taper Shank, 135 Degree Split Point, 1 7/8" Dia. x 16 1/2" Lg (Pack of

Greenfield Industries is a leading manufacturer of expendable cutting tools and related products. The company sells thousands of products under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, and Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The product lines include drills, end mills, taps, dies, reamers, countersinks, counterbores, tool bits, and more. These tools are used in a variety of applications, If it's being drilled, cut, bored, dug, shaped, milled, stamped, formed, drawn, or threaded, Greenfield Industries products are hard at work. In 2009, Greenfield Industries became part of the Top-Eastern Group, the world’s largest manufacturer of twist drills. The blending of these two powerhouse companies allows both the global capacity necessary to engage in the world’s cutting tool markets. By combining the benefits of world-class manufacturing facilities, experienced sales and technical support, and well-known and respected brand names, Greenfield Industries delivers a winning combination to the market. As our family of customers, distributors, employees, products and services continues to grow, we maintain our commitment to excellence.

  • Brand: Cleveland
  • ASIN: B00074ZS5G
  • UPC: 697334125815
 - MaxTool 9/16
MaxTool 9/16" Twist Drill Bits with Morse Taper Shank; Quality High Speed Steel M2; Black Oxide; 118 Deg Conventional Chisel; MT No2;

Taper Shank Drills are ideal for general applications. Quality high speed steel M2 ensures sharp and fast execution in any material, and offers a combination of hardness, toughness and wear resistance. Premium Heat treated is durable and can withstand heavy duty operation for a long tool life. Black Oxide Surface Treatment holds up lubricant better for smoother drilling. Morse taper shank allows the drills to be installed directly into the machine's spindle to facilitate high-torque applications. Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moreMaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwi...

  • Color: Black Oxide
  • Brand: MaxTool
  • ASIN: B079Q4C6RV
  • UPC: 634301935336
 - Dormer A53012.0 Taper Shank Drill, TiN Coating, High Speed Steel, 12 mm Head Diameter, 101 mm Flute Length, 182 mm Full Length
Dormer A53012.0 Taper Shank Drill, TiN Coating, High Speed Steel, 12 mm Head Diameter, 101 mm Flute Length, 182 mm Full

This taper shank drill comes with tin coating that increases wear resistance and improves tool life. Thinned point design above 14 mm diameter to reduce thrust and improve chip formation.

  • Brand: Dormer
  • ASIN: B01KRYZWHY
 - Steel Dragon Tools Magnetic Drill MT3 3/4
Steel Dragon Tools Magnetic Drill MT3 3/4" Weldon Shank Adapter with Morse Taper fits High Speed Steel Annular

Steel Dragon Tools Magnetic Drill MT3 3/4" Weldon Shank Adapter with Morse Taper fits High Speed Steel Annular CuttersThe Steel Dragon Tools MT3 3/4-inch Weldon Shank Adapter can be used on any machine with a Morse Taper Holder and fits any standard, 3/4-inch annular cutters.Specifications:Chuck Capacity: 3/4 in. Weldon Shank (B16)Shank: MT3 Morse TaperAllen set screws are included.

  • Brand: Steel Dragon Tools
  • ASIN: B009I1SOBY
 - HSS 2-1/4
HSS 2-1/4" MT5 Taper Shank

High Speed Steel, Standard Shank, 118 Degree Point Flute Length: 10-1/8" Overall Length" 17-3/8" General purpose flute construction for use in wide variety of materials.

  • Brand: MEDA - SUPERIOR IMPORT
  • ASIN: B008K1TN7W
 - Dormer A95216.5 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 16.5 mm Head Diameter, 295 mm Flute Length, 445 mm Full Length
Dormer A95216.5 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 16.5 mm Head Diameter, 295 mm Flute Length, 445 mm Full

Allows greater drilling depths in one pass. Bright finish in flutes improves chip flow for soft or non-ferrous materials.

  • Brand: Dormer
  • ASIN: B01KRZ0SW2
 - Chicago Latrobe 110S High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 3/4
Chicago Latrobe 110S High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 3/4"

Chicago Latrobe Taper Shank Drill Bit with Alternate Shank Size - Drill Size .7500", Flute Length 5-7/8", Overall Length 10-1/2", Material Type - HSS, Point Angle - 118 Degree, Finish/Coating: Black Oxide

  • Brand: Chicago Latrobe
  • ASIN: B00462RII0
  • UPC: 662355538487
 - HSS 2-1/8
HSS 2-1/8" MT5 Taper Shank

High Speed Steel, Standard Shank, 118 Degree Point Flute Length: 10-1/4" Overall Length" 17-3/8" General purpose flute construction for use in wide variety of materials.

  • Brand: MEDA - SUPERIOR IMPORT
  • ASIN: B008K1QP00
 - Dormer G33831.0 Countersink, Taper Shank, High Speed Steel, Full Length 112 mm, Flute Length 20 mm, Head Diameter 4.2 mm - 31 mm
Dormer G33831.0 Countersink, Taper Shank, High Speed Steel, Full Length 112 mm, Flute Length 20 mm, Head Diameter 4.2 mm - 31

90 degree Countersink with morse taper shank for multiple materials. Tin coating increases surface hardness and improves chip flow in steel, cast iron and aluminum alloys.

  • Brand: Dormer
  • ASIN: B01KRYUNLO
 - Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 11/32
Precision Twist 209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1

The Precision 209 drill bit is a long-length, black oxide-coated, Morse taper shank drill bit. It can drill to a depth up to four times the diameter of the drill size. The longer length offers more flexibility in thicker materials or hard-to-reach locations. The 209 series has a type N flute form, with a regular helix angle (21 to 34 degrees) and a conventional point design that is the most commonly accepted standard for drilling holes in a variety of materials, such as metal, wood, and synthetics, with best performance in steel and cast iron. Black oxide improves lubricity, resists corrosion, and will not chip or flake off. Black oxide also helps to prevent buildup and welding of material on the tap’s cutting edge when working with iron and steel. The Morse taper is a shank that is tapered from one end to another. The taper of the tool fits into the taper of the tool-holder. The friction between the surfaces provides a secure holding systems and accurate placement of the tool. A drift pin is knocked into the slot at the tang to remove the tool. Drilling, or hole making, is the most common metalworking operation in the world. Twist drill bits are the most common type of drill bit used. Twist drill bits are commonly used to drill holes with hand-operated drills, standalone d...

  • Brand: Precision Twist Drill
  • ASIN: B002E8RMHA
  • UPC: 086071201225
 - Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1 15/16
Precision Twist S209 High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 1

The Precision Twist S209 drill bit is a long-length, black oxide coated, small Morse taper shank drill bit. It can drill to a depth up to four times the diameter of the drill size. The shank diameter is the same as the drill size. The longer length offers more flexibility in thicker materials or harder to reach locations. The S209 series has a type N flute form, with a regular helix angle of 21 to 34 degrees and a conventional point design that is the most commonly accepted standard for drilling holes in a variety of material, such as metal, wood, and synthetics, with best performance in steel and cast iron. Black oxide improves lubricity, resists corrosion, and will not chip or flake off. Black oxide also helps to prevent buildup and welding of material on the tap’s cutting edge when working with iron and steel. The Morse taper is a shank that is tapered from one end to another. The taper of the tool fits into the taper of the toolholder. The friction between the surfaces provides a secure holding systems and accurate placement of the tool. A drift pin is knocked into the slot at the tang to remove the tool. Drilling, or hole making, is the most common metalworking operation in the world. Twist drill bits are the most common type of drill bit used. Twist drill bits are com...

  • Brand: Precision Twist Drill
  • ASIN: B002E8XJ1I
  • UPC: 086071231604
 - Dormer A95215.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 15 mm Head Diameter, 275 mm Flute Length, 425 mm Full Length
Dormer A95215.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 15 mm Head Diameter, 275 mm Flute Length, 425 mm Full

Allows greater drilling depths in one pass. Bright finish in flutes improves chip flow for soft or non-ferrous materials.

  • Brand: Dormer
  • ASIN: B01KRZ0T1M
 - Precision Twist 5ATS High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle, 16.50mm
Precision Twist 5ATS High Speed Steel Taper Shank Drill Bit, Black Oxide Finish, Morse Taper Shank, Spiral Flute, 118 Degree Point Angle,

The Precision Twist 5ATS jobber-length, black oxide-coated, general-purpose, Morse taper shank drill bit drills holes into a wide variety of metals and synthetic materials with best performance in steel and cast iron. It can drill to a depth up to four times the diameter of the drill size. The 5ATS series has a type N flute form (a regular helix angle of 21 to 34 degrees) and has best performance when drilling into magnetic soft steel or structural steel (case carburizing steel). Black oxide helps to prevent buildup and welding of material on the drill’s cutting edge when working with iron and steel. Spiral flutes act as a passageway for chip extraction from the hole and for coolant to enter the hole. Right-hand twist brings chips up and away from the cutting edge. The extra length allows for more freedom in being able to drill a wider variety of circumstances. HSS assures good performance at an economical cost. The Morse taper is a shank that is tapered from one end to another. The taper of the tool fits into the taper of the tool-holder. The friction between the surfaces provides a secure holding system and accurate placement of the tool. A drift pin is knocked into the slot at the tang to remove the tool. Drilling, or hole making, is the most common metalworking operation...

  • Brand: Precision Twist Drill
  • ASIN: B002E8RO5K
  • UPC: 086071261656
 - MaxTool 13/16
MaxTool 13/16" Twist Drill Bits with Morse Taper Shank; Quality High Speed Steel M2; Black Oxide; 118 Deg Conventional Chisel; MT No3;

Taper Shank Drills are ideal for general applications. Quality high speed steel M2 ensures sharp and fast execution in any material, and offers a combination of hardness, toughness and wear resistance. Premium Heat treated is durable and can withstand heavy duty operation for a long tool life. Black Oxide Surface Treatment holds up lubricant better for smoother drilling. Morse taper shank allows the drills to be installed directly into the machine's spindle to facilitate high-torque applications. Precision ground with geometry of 118 degree chisel for quick penetration and an accurate start. The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.MaxTool is a cutting tools distributor in New York to meet a wide range cutting demand of customers in today's markets, which include automotive, aerospace, electronics, medical, printed circuit boards, optical industries, and moreMaxTool maintains the leading spirit in supply of standard and custom-made high performance cutting tools, such as Polycrystalline diamond (PCD), Polycrystalline Cubic Boron Nitride (PCBN), Carbide, High Speed Steel (HSS) Tools, Hole Saws, Diamond Wheels, etc for machining ferrous, non-ferrous, composite, fiberglass, and carbon fiber materials. We offer our products worldwide, unless otherwi...

  • Color: Black Oxide
  • Brand: MaxTool
  • ASIN: B079Q8M2ZZ
  • UPC: 634301935404
 - Dormer A35032.0 Taper Shank Drill, Steam Oxide, High Speed Steel, 32 mm Head Diameter, 248 mm Flute Length, 397 mm Full Length
Dormer A35032.0 Taper Shank Drill, Steam Oxide, High Speed Steel, 32 mm Head Diameter, 248 mm Flute Length, 397 mm Full

This shank drill comes with long Series and steam oxide for increased wear resistance lubricity.

  • Brand: Dormer
  • ASIN: B01KRYZL3O
 - Chicago Latrobe 120 High-Speed Steel Long Length Drill Bit, Black Oxide Finish, Round Shank, 118 Degree Conventional Point, 3/4
Chicago Latrobe 120 High-Speed Steel Long Length Drill Bit, Black Oxide Finish, Round Shank, 118 Degree Conventional Point, 3/4" Size (Pack of

The Chicago-Latrobe 120 series long length drill bit is made from high-speed steel with a black oxide finish and has a 118-degree conventional point for use in deep drilling applications on ferrous materials. High-speed steel (HSS) provides hardness for wear resistance, and the black oxide finish reduces wear while promoting chip and coolant flow. A long length drill bit reaches farther and drills deeper than a jobber length drill bit because it has longer flutes and overall length. The round shank accommodates most drill chucks. Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach for the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less p...

  • Brand: Chicago Latrobe
  • ASIN: B000LE7436
  • UPC: 662355497487
 - Dormer A95216.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 16 mm Head Diameter, 295 mm Flute Length, 445 mm Full Length
Dormer A95216.0 Morse Taper Shank Drill, High Speed Steel, Bright/ST, 16 mm Head Diameter, 295 mm Flute Length, 445 mm Full

Allows greater drilling depths in one pass. Bright finish in flutes improves chip flow for soft or non-ferrous materials.

  • Brand: Dormer
  • ASIN: B01KRZ0T8U
 - Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Taper Chamfer, 1-1/4
Drill America DWT Series Qualtech High-Speed Steel Hand Threading Tap, Uncoated (Bright) Finish, Round with Square End Shank, Taper Chamfer, 1-1/4"-8 Size (Pack of

Drill America DWT Series Qualtech hand threading tap is the most versatile taps for hand use, or for tapping under power. Hand threading tap is popular for use in general machine tapping or CNC tapping. This is also appropriate for tapping the vast majority of materials in through or blind holed conditions. Taper style: starts the thread square with the workpiece.

  • Brand: Drill America
  • ASIN: B00FXLL0RS
  • UPC: 887861097246

Get a Great Deal on High Speed Taper Shank Drill.‎

Looking for more High Speed Taper Shank Drill similar ideas? Try to explore these searches: Djs Guide, Mercedes 350 Series, and Dodge Dakota Bed Liners.


           

Viking Drill and Tool - HSS Taper Shank

High Speed Taper Shank Drill

High Speed Steel 118 Deg point Taper Shank - Black Oxide Flute and Clearance

Tags: High Speed Steel Taper Shank

HSS Taper Shank Drill Bits black flute & white shank,Drill Bits

High Speed Taper Shank Drill

The video shows the production process of drill bits.Our main products are straight shank twist drills, taper shank twist drills, such as 1/2 shank drill,hss twist drill enjoys a high reputation both at home and abroad. http://www.jinlei-drills.com/

Tags: Drill Bit Shank,Machine Taper,High-speed Steel

HSS Taper Shank Drill Set,HSS Drill Bit set ,Drill Bit

High Speed Taper Shank Drill

The video shows the production process of drill bits.Our main products are straight shank twist drills, taper shank twist drills, such as 1/2 shank drill,HSS Taper Shank Drill Set, enjoys a high reputation both at home and abroad. http://www.jinlei-drills.com/index.php?route=product/category&pat...

Tags: Drill Bit,High-speed Steel

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.