Explore deals

Milwaukee Stem



 - Milwaukee Valve BA-475B-xH Series Brass Ball Valve with Extension Stem, Two Piece, Inline, Lever, 1/2
Milwaukee Valve BA-475B-xH Series Brass Ball Valve with Extension Stem, Two Piece, Inline, Lever, 1/2" NPT

The Milwaukee Valve BA-475B-XH series brass two-piece inline ball valve with extension stem has a lever handle and National Pipe Taper (NPT) female threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The extension stem design allows installations where pipe insulation would make standard handles inoperable. Polytetrafluoroethylene (PTFE) seats and stem packing reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), 150 psig for saturated steam, and the working temperature range is 0 to 350 degrees Fahrenheit. This valve meets Manufacturers Standardization Society (MSS) SP-110 and American Society of Mechanical Engineers (ASME) A112.4.14 standards for quality assurance.Ball va...

  • Brand: Milwaukee
  • ASIN: B006X4P95S
  • UPC: 697988497290
 - MILWAUKEE VALVE CO 115 1/2 SWEAT BRONZE WHEEL OPERATED GATE VALVE/W NON-RISING STEM
MILWAUKEE VALVE CO 115 1/2 SWEAT BRONZE WHEEL OPERATED GATE VALVE/W NON-RISING

1/2"SWEAT GATE VALVE/W NON-RISING STEM, S.W.P:125 PSI, W.O.G.:200 PSI, OPERATOR:WHEEL, MATERIAL:BRONZE, DIMS:4-1/4"H X 2"W X 2"D, WEIGHT:1.5 POUNDS, IN BULK, MADE IN USA. **(NOT INTENDED FOR USE IN POTABLE WATER)**

  • Color: SEE PICTURE
  • Brand: MILWAUKEE VALVE CO
  • ASIN: B07CZLDDTN
  • UPC: 099461123281
 - Milwaukee Valve 148 Series Bronze Gate Valve, General Service, Class 125, Rising Stem, 1
Milwaukee Valve 148 Series Bronze Gate Valve, General Service, Class 125, Rising Stem, 1" NPT

This class 125 Milwaukee Valve 148 series bronze gate valve has a rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass. It has a rising stem that moves up and down with the gate to offer a visual signal (when extended) that the valve is open. The stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the wedge to start and stop the flow between the connected pipes. This class 125 valve meets Manufacturers Standardization Society (MSS) SP-80 standard (excluding the 4-inch model, as it has a split wedge and bolted bonnet and does not meet MSS SP-80) for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement...

  • Brand: Milwaukee
  • ASIN: B0068TVP3S
  • UPC: 697988195714
 - 13.7
13.7" Print Sublimated Backpack,Daffodil Decor,Tulip and Daffodil Flower Stems with Leaves Summertime Vintage Floral Artwork,Purple Yellow Green,for Boys and

Welcome to iPrint,exclusively designed for you, the customer in mind. Features: -Durable lightweight backpack,smooth double zippers. -Air cushion belt carrying system, Thicken breathable strap design,comfortable to carry. -Breathable and comfortable:sponge mesh material to ease your back and shoulder,Adjustable padded shoulder straps for cushioned comfort. -Casual Easy style using for: School, Excursion, Going out, window shopping etc. -Double zippers closure type. Washing instructions: -Washing with clean water with ordinary temperatures,don't washing with hot water. -Washing separately to avoid staining. -Hang to dry. Dear Customer: Thanks for your order! We will always strive for 100% customer satisfaction.Your positive feedback will be greatly appreciated! If you have problems, please email us firstly about your concerns. We commit to offer you the best product and service! What are you waiting for? Get your Bag today!

  • Color: yellow
  • Brand: iPrint
  • ASIN: B07J5BQM7D
 - Milwaukee Valve UP149 Series Bronze Gate Valve, Potable Water Service, Rising Stem, 1/2
Milwaukee Valve UP149 Series Bronze Gate Valve, Potable Water Service, Rising Stem, 1/2" Solder

This Milwaukee Valve UP149 Ultra Pure series bronze gate valve has a rising stem, solder end connections, and it is lead-free for potable water plumbing systems. The lead-free bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and the valve has a rising stem that moves up and down with the gate to offer a visual signal (when extended) that the valve is open. The stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG). It has solder end connections for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. The valve is appropriate for use in plumbing systems that convey or dispense water intended for cooking or human consumption. This gate valve is certified to contain no more than 0.25 percent lead by weighted average on its wetted surfaces, and it complies with California AB1953, Vermont Act 193, Maryland HB372, and feder...

  • Brand: Milwaukee
  • ASIN: B0068TXKYK
  • UPC: 697988614055
 - MILWAUKEE VALVE CO 105 1/2 1/2 FPT BRONZE WHEEL OPERATED GATE VALVE/W NON-RISING STEM
MILWAUKEE VALVE CO 105 1/2 1/2 FPT BRONZE WHEEL OPERATED GATE VALVE/W NON-RISING

1/2"FPT GATE VALVE/W RISING STEM, S.W.P:125 PSI, W.O.G.:200 PSI, OPERATOR:WHEEL, MATERIAL:BRONZE, DIMS:4-1/4"H X 2"W X 2"D, WEIGHT:1 POUND, IN BULK, MADE IN USA. **(NOT INTENDED FOR POTABLE WATER)**

  • Color: SEE PICTURE
  • Brand: MILWAUKEE VALVE CO
  • ASIN: B07CZL1MTN
  • UPC: 099461123267
 - Milwaukee Valve 2885-M Series Iron Gate Valve, Class 125, Rising Stem, 3
Milwaukee Valve 2885-M Series Iron Gate Valve, Class 125, Rising Stem, 3"

This class 125 Milwaukee Valve 2885-M series iron gate valve has bronze-mounted seat rings, an outside screw and yoke, and flanged end connections for bolting to flanges. The cast-iron construction, bolted bonnet, and solid wedge gate provide compressive strength and resistance to wear. The bronze-mounted seat rings equip it for high pressure applications and help resist corrosion over time. The valve has an outside screw and yoke (OS&Y) rising stem, which visually signals when the valve is open by the extension of the screw out of the center of the manually operated cast-iron hand wheel. The 2-, 2-1/2-, and 2" models of this valve are made with the yoke integral with the bonnet while the 4" valves and larger have separate yokes that are bolted to their bonnet. The stem design and non-asbestos graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion, thereby extending the life of the valve. The valve’s maximum pressure is 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure. It has flanged end connections on both ends for bolting to compatible American National Standards Institute (ANSI) 125-lb. flanges. This class 125 valve meets Manufacturers Standardiz...

  • Brand: Milwaukee
  • ASIN: B0068TWK4G
  • UPC: 697988245426
 - Milwaukee Valve UP148 Series Bronze Gate Valve, Potable Water Service, Rising Stem, 1
Milwaukee Valve UP148 Series Bronze Gate Valve, Potable Water Service, Rising Stem, 1" NPT

This Milwaukee Valve UP148 Ultra Pure series bronze gate valve has a rising stem, female National Pipe Taper (NPT) threads, and it is lead-free for use in potable water systems. The lead-free bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and the valve has a rising stem that moves up and down with the gate to provide a visual signal (when extended) that the valve is open. The stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG). It has female NPT threads for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. The valve is appropriate for use in plumbing systems that convey or dispense water intended for cooking or human consumption. The valve is certified to contain no more than 0.25 percent lead by weighted average on its wetted surfaces, and complies with California AB1953, Vermont Act 193, Maryland HB372, and federal publi...

  • Brand: Milwaukee
  • ASIN: B0068TXBVW
  • UPC: 697988614000
 - Brass Stem
Brass Stem

Milwaukee* Stem.

  • Brand: Milwaukee
  • ASIN: B00GJVYI20
  • UPC: 703765150590
 - Milwaukee Valve 1151 Series Bronze Gate Valve, Industrial Service, Class 150, Rising Stem, 3/4
Milwaukee Valve 1151 Series Bronze Gate Valve, Industrial Service, Class 150, Rising Stem, 3/4" NPT

This class 150 Milwaukee Valve 1151 series bronze gate valve has a rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and union bonnet provide higher strength and resistance to corrosion than brass, and it has a rising stem that moves up and down with the gate that provides a visual signal (when extended) that the valve is open. This stem design and the graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 150 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 150 valve meets Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for use in industrial service in plumbing a...

  • Brand: Milwaukee
  • ASIN: B0068TU2E6
  • UPC: 697988178045
 - MILWAUKEE ELEC TOOL GIDDS2-288392 48-25-1372 Standard Selfeed Drill Bit
MILWAUKEE ELEC TOOL GIDDS2-288392 48-25-1372 Standard Selfeed Drill

BIT SELFEED 1-3/8". The product is 1-3/8", Self Feed Bit, 2 Feed Screws Included. Easy and simple use kit. The product is manufactured in China.

  • Color: N/A
  • Brand: Milwaukee
  • ASIN: B000F6V0O4
  • UPC: 045242119172
 - GlyndaHoa Adult Milwaukee Adjustable Hip Hop Hat & Cap
GlyndaHoa Adult Milwaukee Adjustable Hip Hop Hat &

we are dedicated to provide best quality product and good customer service! Cartoon Hands Rolling Joint Cotton Adjustable Denim Hats For Man And Woman. Very Durable,Adapt To Numerous Kinds Of Sports Activities. ADJUSTABLE BASEBALL CAP, Great Fit For All Head Sizes. Material: Cotton Denim Fabric (single) Size: Cap Height: 9cm, Brim: 7cm, Cap Circumference: 55-59cm. Your Satisfaction Is Always Our Promise...buy With Confidence, As We Offer Easy Returns And Exchanges And A 100% Money Back Guarantee.

  • Color: 987
  • Brand: GlyndaHoa
  • ASIN: B07J2H66BG
 - Milwaukee Valve 105 Series Bronze Gate Valve, General Service, Class 125, Non-Rising Stem, 1
Milwaukee Valve 105 Series Bronze Gate Valve, General Service, Class 125, Non-Rising Stem, 1" NPT

This class 125 Milwaukee Valve 105 series bronze gate valve has a non-rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and it has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use. The graphite internal packing helps prevent the valve’s stem from leaking. The maximum pressure is 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 125 valve meets Manufacturers Standardization Society (MSS) SP-80 standards (with the exception of the 4-inch model of this valve, as it has a split wedge and bolted bonnet, and does not meet MSS SP-80) for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve ...

  • Brand: Milwaukee
  • ASIN: B0068TSWC0
  • UPC: 697988162518
 - Milwaukee Valve 1174 Series Bronze Gate Valve, Heavy Duty Service, Class 200, Rising Stem, 1/2
Milwaukee Valve 1174 Series Bronze Gate Valve, Heavy Duty Service, Class 200, Rising Stem, 1/2" NPT

This class 200 Milwaukee Valve 1174 series bronze gate valve has a rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and union bonnet provide higher strength and resistance to corrosion than brass. The stainless-steel seat rings equip the valve for high pressure applications and help resist corrosion over time. It has a rising stem that moves up and down with the gate that provides a visual signal (when extended) that the valve is open. This stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 400 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 200 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. The class 200 valve meets Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct mea...

  • Brand: Milwaukee
  • ASIN: B0068TUWBE
  • UPC: 697988181601
 - Milwaukee Valve 149 Series Bronze Gate Valve, General Service, Class 125, Rising Stem, 1
Milwaukee Valve 149 Series Bronze Gate Valve, General Service, Class 125, Rising Stem, 1" Solder

This class 125 Milwaukee Valve 149 series bronze gate valve has a rising stem and solder end connections on both ends. The bronze body, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and the valve has a rising stem that moves up and down with the gate to offer a visual signal (when extended) that the valve is open. The stem design and graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion for longer valve life. The maximum pressure is 200 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 125 psig for saturated steam pressure. It has solder end connections on both ends for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 125 valve meets Manufacturers Standardization Society (MSS) SP-80 (with the exception of the 4-inch model of this valve, as it has a split wedge and bolted bonnet that does not meet MSS SP-80) standard for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it...

  • Brand: Milwaukee
  • ASIN: B0068TW3LQ
  • UPC: 697988197176
 - Milwaukee Valve 1150 Series Bronze Gate Valve, General Service, Class 150, Rising Stem, 3/4
Milwaukee Valve 1150 Series Bronze Gate Valve, General Service, Class 150, Rising Stem, 3/4" NPT

This class 150 Milwaukee Valve 1150 series bronze gate valve has a rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass, and it has a rising stem that moves up and down with the gate to offer a visual signal (when extended) that the valve is open. This stem design and the graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 150 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 150 valve meets Manufacturers Standardization Society (MSS) SP-80 (with the exception of the 4-inch model of this valve, as it has a split wedge and bolted bonnet that does not meet MSS SP-80) standard for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness...

  • Brand: Milwaukee
  • ASIN: B0068TTX8M
  • UPC: 697988177352
 - Milwaukee Valve P901 Series Bronze Gate Valve, Class 150, Quick Opening Stem, Lever Handle, 1-1/2
Milwaukee Valve P901 Series Bronze Gate Valve, Class 150, Quick Opening Stem, Lever Handle, 1-1/2" NPT

This class 150 Milwaukee P901 series bronze gate valve has a quick-opening stem with a lever handle and female National Pipe Taper (NPT) threads on both ends. The bronze construction of the gate valve and its brass double discs provide higher strength and resistance to corrosion than steel. The valve has a brass quick-opening stem that is manually operated by turning a malleable iron lever handle, which pushes the discs into the valve’s passage to stop flow between pipes. The pressure between the two discs forms a tight seal to stop potentially dangerous fluids from leaking and mixing. With the exception of the 4" valve that has an O-ring, this valve has graphite internal stem packing. The valve has female NPT threads on both ends for connecting to male threaded pipes. The maximum pressure of this class 150 valve is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 150 psig for saturated steam pressure. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for quick draining and steam blow-off use and other heating and plumbing applications. Gate valves control flow in a piping system by lifting a gate out of the path o...

  • Brand: Milwaukee
  • ASIN: B0068TWWIU
  • UPC: 697988155893
 - GlyndaHoa Adult Milwaukee Adjustable Hip Hop Hat & Cap
GlyndaHoa Adult Milwaukee Adjustable Hip Hop Hat &

we are dedicated to provide best quality product and good customer service! Cartoon Hands Rolling Joint Cotton Adjustable Denim Hats For Man And Woman. Very Durable,Adapt To Numerous Kinds Of Sports Activities. ADJUSTABLE BASEBALL CAP, Great Fit For All Head Sizes. Material: Cotton Denim Fabric (single) Size: Cap Height: 9cm, Brim: 7cm, Cap Circumference: 55-59cm. Your Satisfaction Is Always Our Promise...buy With Confidence, As We Offer Easy Returns And Exchanges And A 100% Money Back Guarantee.

  • Color: 987
  • Brand: GlyndaHoa
  • ASIN: B07HNYN8LK
 - Milwaukee Valve 1140 Series Bronze Gate Valve, General Service, Class 150, Non-Rising Stem, 1-1/4
Milwaukee Valve 1140 Series Bronze Gate Valve, General Service, Class 150, Non-Rising Stem, 1-1/4" NPT

This class 150 Milwaukee Valve 1140 series bronze gate valve has a non-rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass. It has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve’s stem from leaking. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 150 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 150 valve meets Manufacturers Standardization Society (MSS) SP-80 (with the exception of the 4-inch model of this valve, as it has a split wedge and bolted bonnet, and it does not meet MSS SP-80) for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is app...

  • Brand: Milwaukee
  • ASIN: B0068TT5W6
  • UPC: 697988165977
 - Milwaukee Valve P902 Series Bronze Gate Valve, Class 150, Quick Opening Stem, Spring Loaded Lever Handle, 3/4
Milwaukee Valve P902 Series Bronze Gate Valve, Class 150, Quick Opening Stem, Spring Loaded Lever Handle, 3/4" NPT

This class 150 Milwaukee P902 series bronze gate valve has a quick-opening stem with a spring-loaded lever handle and National Pipe Taper (NPT) threads on both ends. The bronze construction of the gate valve and its brass double discs provide higher strength and resistance to corrosion than steel. The valve has a brass quick-opening stem that is manually operated by turning a spring-loaded iron lever handle, which pushes the discs into the valve’s passage to stop flow between pipes. The pressure between the two discs, coupled with the nitrile rubber (Buna-N) O-ring stem packing, forms a tight seal to prevent potentially dangerous fluids from leaking and mixing. The valve has female NPT threads on both ends for connecting to male threaded pipes. The maximum pressure of this Class 125 valve is 150 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG). Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for many applications, in particular with petroleum-based fluids with tank trucks and bulk plants. Gate valves control flow in a piping system by lifting a gate out of the path of steam, fluids, or gases. They are designed to block or...

  • Brand: Milwaukee
  • ASIN: B0068TWY8S
  • UPC: 697988156197
 - Milwaukee Valve 1186 Series Bronze Gate Valve, Heavy Duty Service, Class 300, Non-Rising Stem, 1-1/4
Milwaukee Valve 1186 Series Bronze Gate Valve, Heavy Duty Service, Class 300, Non-Rising Stem, 1-1/4" NPT

This class 300 Milwaukee Valve 1186 series bronze gate valve has a non-rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and union bonnet provide higher strength and resistance to corrosion than brass. The stainless-steel seat rings equip it for high pressure applications and help resist corrosion over time. It has a non-rising stem that stays fixed in place when gate is raised or lowered for low clearance or underground use. The graphite internal packing helps prevent the valve’s stem from leaking. The maximum pressure is 1,000 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 300 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 300 valve meets Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. The valve is appropriate for use in heavy duty ...

  • Brand: Milwaukee
  • ASIN: B0068TVLR8
  • UPC: 697988183926
 - Milwaukee Valve UP105 Series Bronze Gate Valve, Potable Water Service, Non-Rising Stem, 1/2
Milwaukee Valve UP105 Series Bronze Gate Valve, Potable Water Service, Non-Rising Stem, 1/2" NPT

This Milwaukee Valve UP105 Ultra Pure series bronze gate valve has a non-rising stem, female National Pipe Taper (NPT) threads, and it is lead-free for potable water plumbing systems. The lead-free bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass. The valve has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve’s stem from leaking. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG). It has female NPT threads for use with male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. The valve is appropriate for use in plumbing systems that convey or dispense water intended for cooking or human consumption. This gate valve is certified to contain no more than 0.25 percent lead by weighted average on its wetted surfaces, and complies with California AB1953, Vermont Act 193, Maryland HB372, and federal public law 111-380 for use with potable water. The valve meets Manufacture...

  • Brand: Milwaukee
  • ASIN: B0068TX14O
  • UPC: 697988613829
 - Milwaukee Valve 1156 Series Bronze Gate Valve, Industrial Service, Class 200, Rising Stem, 1/2
Milwaukee Valve 1156 Series Bronze Gate Valve, Industrial Service, Class 200, Rising Stem, 1/2" NPT

This class 200 Milwaukee Valve 1156 series bronze gate valve has a rising stem and female National Pipe Taper (NPT) threads on both ends. The bronze construction, solid wedge gate, and union bonnet provide higher strength and resistance to corrosion than brass. The Cu-Ni seat rings equip the valve for industrial service applications and help prevent rust and erosion over time. It has a rising stem that moves up and down with the gate that provides a visual signal (when extended) that the valve is open. This stem design and the graphite internal packing also prevent the stem threads from coming into contact with flow to avoid corrosion to extend valve life. The maximum pressure is 400 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG) and 200 psig for saturated steam pressure. It has female NPT threads on both ends for connecting to male threaded pipes. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. This class 200 valve meets Manufacturers Standardization Society (MSS) SP-80 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a di...

  • Brand: Milwaukee
  • ASIN: B0068TUKTS
  • UPC: 697988180239
 - Haixia Teen's Boy's&Girl's Bookbags with Pocket Rose Bridal Feminine Arrangement Soulful Spring Flora Stems Pattern Botanical Garden Nature Decorative
Haixia Teen's Boy's&Girl's Bookbags with Pocket Rose Bridal Feminine Arrangement Soulful Spring Flora Stems Pattern Botanical Garden Nature

You Can Throw Your Most Important Materials Together Quickly And Safely With Ease And Organization In The Iconic Campus Backpack. When Quality Material Meets Precise Craftsmanship, You Get A Work Necessity Made To Last Through All Of Life¡¯s Journeys. Care: Machine Wash Cold, Gentle Cycle, Use Only Non-chlorine Bleach As Needed; Line Dry.

  • Color: Navy
  • Brand: Haixia
  • ASIN: B07GQXMS33
 - Milwaukee Valve UP115 Series Bronze Gate Valve, Potable Water Service, Non-Rising Stem, 3/4
Milwaukee Valve UP115 Series Bronze Gate Valve, Potable Water Service, Non-Rising Stem, 3/4" Solder

This Milwaukee Valve UP115 Ultra Pure series bronze gate valve has a non-rising stem, solder end connections, and it is lead-free for potable water plumbing systems. The lead-free bronze construction, solid wedge gate, and threaded bonnet provide higher strength and resistance to corrosion than brass. It has a non-rising stem that stays fixed in place when the gate is raised or lowered for low clearance or underground use, and the graphite internal packing helps prevent the valve’s stem from leaking. The maximum pressure is 300 pounds per square inch (gauge) (psig) for water, oil, and gas pressure (WOG). It has solder end connections for a semi-permanent connection to a piping system. Mounted on top of the valve, a manually operated malleable iron hand wheel activates the inside screw mechanism, which lifts and lowers the gate to start and stop the flow between the connected pipes. The valve is appropriate for use in plumbing systems that convey or dispense water intended for cooking or human consumption. This gate valve is certified to contain no more than 0.25 percent lead by weighted average on its wetted surfaces, and complies with California AB1953, Vermont Act 193, Maryland HB372, and federal public law 111-380 for use with potable water services. The valve meets Manuf...

  • Brand: Milwaukee
  • ASIN: B0068TX7AC
  • UPC: 697988613904

Get a Great Deal on Milwaukee Stem.‎

Looking for more Milwaukee Stem similar ideas? Try to explore these searches: Snooze Bar, Frameless Bathtub Door, and Riedel Ouverture Magnum.


           

Why Students Love STEM: Milwaukee, Part II

Milwaukee Stem

In 2008, the NEA Foundation partnered with the AT&T Foundation to support innovate STEM projects for high school students. In Milwaukee Public Schools, students are learning about safe, local, and sustainable food sources through the Urban School Aquaponics Initiative.

Tags: STEM,Milwaukee Public Schools,aquaponics

Why Students Love STEM: Milwaukee, Part I

Milwaukee Stem

In 2008, the NEA Foundation partnered with the AT&T Foundation to support innovate STEM projects for high school students. In Milwaukee Public Schools, students are learning about safe, local, and sustainable food sources through the Urban School Aquaponics Initiative. Learn more: http://ow.ly/K...

Tags: STEM,Milwaukee Public Schools,aquaponics

Milwaukee Valve Company Installing a Stem Extension on a Bronze Ball Valve

Milwaukee Stem

Description: Milwaukee Valve Company Installing a Stem Extension on a Bronze Ball Valve.

Tags: Milwaukee Valve,Stem Extension,Ball Valve,Valve...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.