Home Brew Stuff SS-WV2 1/2" Stainless Steel Valve Weldless Bulkhead for Home Brew
The complete kit includes a weldless bulkhead assembly to convert any kettle or converted keg (kegler) without welding. It has standard 2 piece full port valve, and 1/2\" hose barb. Fits into 13/16\" drilled hole in kettle or keg wall. All fittings are 304 stainless steel, 1/2\" NPT thread. Seals are all high temp silicone.
- Color: Stainless Steel
- Brand: Home Brew Stuff
- ASIN: B00420WMUU
- UPC: 642125541923
Stainless Steel Bulkhead FPT 1/2" homebrew Weldless for beer kettle valve and Bi-metal Thermometer For Beer Keg Kettle Valve Beer Faucet tap Keg
1/2" Female threaded 304 Ss construction Hi-temp silicone o-rings Fits into 13/16" punch hole
- Color: Silver
- Brand: semfeil
- ASIN: B07Q792Z41
- UPC: 741722313459
S/S Bulkhead 1/2" FPT x 1/2"
This is the stainless steal bulkhead that we use on our Series of weld less fittings. 1/2 inch FPT x 1/2 inch MPT along with a flat, thick rubber washer that makes it Super easy to install on most kettles.
- Brand: Homebrewers Outpost
- ASIN: B074D9KKCY
CONCORD 1/2" Weldless Bulkhead Fitting for Beer Wine. Full 304 Stainless Steel. 2
Set Includes: 1/2" Weld-less Bulk Head Fitting Set. -Pictures show how fitting looks when installed- . 2 PK
- Color: Silver Stainless Steel
- Brand: Concord Global Trading
- ASIN: B076DKG5R2
- UPC: 877769006709
Quick Fit Weldless Bulkhead All Thread with Coupling,
This XL bulkhead has a two inch long all tread nipple. Unlike the smaller bulkheads that may not provide enough thread when connected, this XL bulkhead provides more than enough to attach your brewing accessories. All metal parts are stainless steel. The two orings are high temp silicon orings.
- Color: Stainless Steel
- Brand: QuickFit
- ASIN: B00S8OOS44
- UPC: 793842147735
Weldless Bulkhead - Stainless
Stainless steel bulkhead with half inch threaded Hex nipple, high temperature silicone Flat Gasket, Two flat Stainless washers and one half inch coupling. Use this weld less fitting to easily and quickly add a valve or thermometer to your stock pot, kettle, bucket, mash ton, or later ton This bulkhead includes two high temp Flat Gaskets One goes on the inside of the kettle to form a tight leak free seal, the other is a spare. All metal parts are made of 304 stainless steel.
- Color: Stainless Steel
- Brand: Learn To Brew LLC
- ASIN: B00JHM38RE
- UPC: 855740005040
RAINPAL SSBF010 Female 3/4" Stainless Steel Bulkhead Fitting
- Brand: RAINPAL
- ASIN: B07P7WPG3X
DERNORD 1/2 Inch Stainless Stee Ball Valve Weldless Bulkhead For Home Brew Kettle (1/2 NPT to 1/2 Barb
From the Manufacturer All metal pieces of our valves are 304 Stainless steel, including the nuts and other exterior metals. Other manufacturers cut costs by using 201 Stainless steel on these parts which results in a rusty looking Valve over time. DERNORD manufacturers its 2-piece ball valves with all 304 Stainless steel parts so you can be sure there won't be any rust formation from external air or water exposure over time. Available in both Wog200 and Wog1000. Wog200 are considered ideal for most general applications. Wog1000 are for high pressure and industrial applications where of the Valve are preferred. The complete kit includes a weldless bulkhead assembly to convert any kettle or converted keg (kegler) without welding, includes Instructions. It has standard 2 piece full port valve, and 1/2" hose barb. Fits into 13/16" drilled hole in kettle or keg wall. All fittings are 304 stainless steel, 1/2" NPT thread.A full coupler has been added in the back of the spigot to allow for the addition of any 1/2" Male NPT fitting you need - barb, Compression fitting, etc. The complete kit includes a weldless bulkhead assembly to convert any kettle or converted keg (kegler) without welding, includes Instructions. It has standard 2 piece full port valve, and 1/2" hose barb. Fits into...
- Brand: DERNORD
- ASIN: B07D79S8T1
- UPC: 698253849363
Stainless Steel Weldless Bulkhead 1/2''
Weldless Bulkhead1/2" Female NPT I.D. 3/4" Straight Pipe (Approx. 1.030 O.D.)No welds needed!! Learn about sealing National Pipe Thread (NPT) fittings.
- Brand: Adventures in Homebrewing
- ASIN: B07F8Z26MC
- UPC: 680243823309
Bulkhead Compression Fitting 1.5" TC homebrew Weldless Bulkehad 304 Stainless Steel Homebrew Kettle
Add a 1.5" TC flange to virtually any vessel !Just drill a 32.5mm to 34mm(about 12.8" ) hole and tighen the locknut with 2pcs Food grade gaskets.
- Color: 304 Stainless Steel
- Brand: CRBrewBeer
- ASIN: B07QZVL4ZF
Get a Great Deal on Stainless Bulkhead.
Brew Hacks: Drilling a hole in stainless for a bulkhead fitting
One of my biggest recommendations to new brewers on how to make their brew easier is to add a spigot or valve to their kettle and fermenter. This allows for easy movement of hot wort and contamination free sampling from a fermenter for gravity readings and taste tracking. It's super easy to do an...
Welding some Stainless Steel Bulkhead Feedthru Ducts
Welding some Stainless Feedthru Ducts
Tig Welding 304SS Bulkhead Fittings
Welding 304ss Bulkhead Fittings