Explore deals

1/2 Shank Round Nose Router



 - uxcell 1-inch Cutting Dia, 1/2-inch Straight Shank, Tungsten Steel Core Box Round Nose Router Bit
uxcell 1-inch Cutting Dia, 1/2-inch Straight Shank, Tungsten Steel Core Box Round Nose Router

Product Name: Round Nose Router BitMaterial: Tungsten SteelWeight: 83gPackage Content: 1 x Round Nose Router BitStandard: 1/2-inch x 1-inchShank Diameter: 1/2-inchCutting Diameter: 25.4mm / 1-inchCutting Radius: 12.7mm / 1/2-inchCutting Depth: 22.5mm / 0.89-inchOverall Length: 62mm / 2.44-inchColor: Gray,Silver ToneMax. Rotation Speed: 24,000 RPMTool maintenance:Keep tools clean after using them, remove resin, sawdust on the timber, using standard industrial solvent to clean the tool.Apply a small amount of oil can prevent the tool surface rust, clean up all the dirt of the shank to prevent slippage during use.Do not attempt to grind the tool or change the shape of the tool.Notice: When the tool is blunt, replace with a new tool, do not continue to use the tool in order to avoid breakage and harm accidents.Must use a suitable clamp(not included here). If the clamp is not round or worn, it will cause the clamp can not clamp the tool properly, please replace the clamp with standard specification immediately to prevent dangerous situation such as handle shaking, flying off or twisted off when the tool is working at high speed.

  • Brand: uxcell
  • ASIN: B01N4Q3CFX
  • UPC: 604267110313
 - Yakamoz 5Pcs 1/2 Inch Shank Half Round Bearing Bullnose Router Bit Set Carbide Tipped Round Edge Cutting Bits | Radius 1/8
Yakamoz 5Pcs 1/2 Inch Shank Half Round Bearing Bullnose Router Bit Set Carbide Tipped Round Edge Cutting Bits | Radius 1/8" 3/16" 1/4" 5/16"

Yakamoz Set of 5PCS Half Round Router Bit with Bearing 1/2" ShankFeature:Anti-kickback designSolid Hardened Steel Body and Industrial grade micro grain carbideHigh hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free.Totally enclosed & lubricated BearingBaked on heat resistant coating prevents build-up of sawdust, resin, and pitch.Specification: Shank Diameter: 1/2"Cutting Diameter: 1/4" 3/8" 1/2" 5/8" 3/4"Radius: 1/8" 3/16" 1/4" 5/16" 3/8" Flutes: 2 Body Material: Solid Hardened Steel Blade Material: Industrial grade micro grain carbide Suitable for: Solid wood, MDF, particle board, plywood, etc. Package Includes:5 x Half Round Router Bits

  • Brand: Yakamoz
  • ASIN: B07KFBSL92
 - Roman Carbide DC1065 1-1/2-Inch Round Nose, 1/2-Inch Shank
Roman Carbide DC1065 1-1/2-Inch Round Nose, 1/2-Inch

Used for routing larger flutes and veins. Also for coving edges and surface pieces. Upshear cleans chips out fast. Excellent for architectural millwork. ISO 9001 certification for ultimate quality assurance.

  • Brand: Roman Carbide
  • ASIN: B005W18482
  • UPC: 769433210652
 - Yonico 14956q Round Nose Router Bit with 1/2-Inch W x 3/8-Inch H 1/4-Inch Shank
Yonico 14956q Round Nose Router Bit with 1/2-Inch W x 3/8-Inch H 1/4-Inch

Perfect for round nose plunging and pattern and template routing . Two flute carbide cutters and 1/4" shank.

  • Brand: Yonico
  • ASIN: B00KZM1YVW
  • UPC: 765573826654
 - Freud 1/4
Freud 1/4" Radius Round Nose Bit with 1/4" Shank

Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. 1/2" Overall Dia (D), 3/8" Carbide Height (h), 1/4" Shank, 1/4" Radius ( R ), 1-13/16" Overall Length (H) Ideal For: Fluted millwork, signs and veining. Application: Fluted millwork, signs and decorative veining. Made In Italy.

  • Color: Perma-SHIELD Coating Red
  • Brand: Freud
  • ASIN: B00004T7DF
  • UPC: 008925380382
 - Core Box / Round Nose Router Bit - 1/2
Core Box / Round Nose Router Bit - 1/2"W X 13/16"H - 1/2" Shank - Yonico

Designed for sign making and general round nose grooving. With an overall reach of 7/8" and 1/4" radius, the Yonico 14163 router bit is ideal for long reach core box grooving. Two flute carbide cutters and 1/2" shank.

  • Brand: Yonico
  • ASIN: B00QJA6C5C
  • UPC: 765573828788
 - Bowl & Tray Template Router Bit - 3/4
Bowl & Tray Template Router Bit - 3/4"W X 5/8"H - 1/2" Shank - Yonico

The Yonico 14961 Bowl & Tray Router Bit is perfect for round nose plunging and pattern & template routing. Center meeting blades produce a perfectly smooth finish. Two flute carbide cutters and 1/2" shank.

  • Brand: Yonico
  • ASIN: B00MI2MB3C
  • UPC: 765573825961
 - uxcell Carpenter Woodworking Metal 1/4 Inch Shank Dia 1 Inch Cutting Dia Round Nose Router Bit Cutter
uxcell Carpenter Woodworking Metal 1/4 Inch Shank Dia 1 Inch Cutting Dia Round Nose Router Bit

Provides cleaning and sharp cutting action, cuts all composition materials, plywood, hard wood, and soft wood.Used on hand held and table mounted portable routers, great router bit replacement for woodworking carpenters.

  • Brand: uxcell
  • ASIN: B01M8M8JII
  • UPC: 709874268447
 - Core Box Router Bit Double Flute Round Nose Router Bit Carbide Tipped Woodworking Tool Round Groove Router Bit 3/4'' Radius x 1-1/2'' Dia. x 1/2 inch Shank (1/2X1-1/2)
Core Box Router Bit Double Flute Round Nose Router Bit Carbide Tipped Woodworking Tool Round Groove Router Bit 3/4'' Radius x 1-1/2'' Dia. x 1/2 inch Shank

  • Color: 1/2 inch Shank
  • Brand: TIDEWAY
  • ASIN: B07MQD1TMS
  • UPC: 791280333994
 - Whiteside Router Bits 1410 Round Nose Bit with 5/16-Inch Radius, 5/8-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
Whiteside Router Bits 1410 Round Nose Bit with 5/16-Inch Radius, 5/8-Inch Cutting Diameter and 1-1/4-Inch Cutting

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2ADT6
  • UPC: 844278014105
 - Rannb Carpenter Round Nose Router Bit Two Flutes Radius Core Box Router Bit 1/2
Rannb Carpenter Round Nose Router Bit Two Flutes Radius Core Box Router Bit 1/2" Shank 1 1/2" Cutting Diameter -Pack of

A professinoal tool designed for a variety of materials from wood panels, flakeboard, plywood, MDF and other wood composites sheet materials.Commonly used for sign-making, If you have any question to the product, please feel free to contact us. We are more than happy to answer any question you might have.

  • Brand: Rannb
  • ASIN: B07FQ977HQ
  • UPC: 675234793747
 - Yonico 13515 5 Bit Bullnose Router Bit Set with C3 Carbide Tipped 1/2-Inch Shank
Yonico 13515 5 Bit Bullnose Router Bit Set with C3 Carbide Tipped 1/2-Inch

Cut bullnose edges for countless applications with the 5 bit Yonico 13515 Bullnose Router Bit Set. Bullnose router bit radius sizes include: 1/8"r, 3/16"r, 1/4"r, 5/16"r, 3/8"r. Bead sizes are 1/4", 3/8", 1/2", 5/8", 3/4" respectively. With double passes, Yonico Bullnose Router Bit Set can also make dowels in the following sizes: 1/4", 3/8", 1/2", 5/8" and 3/4". Two flute carbide cutters and 1/2" shanks. Yonico 13515 comes in a solid wood storage case.

  • Brand: Yonico
  • ASIN: B00KZM1BV0
  • UPC: 732454889893
 - Yonico 16170 Small Bowl Router Bit with 1.65-Inch Radius, 1-3/4-Inch Wide and 1/2-Inch Shank
Yonico 16170 Small Bowl Router Bit with 1.65-Inch Radius, 1-3/4-Inch Wide and 1/2-Inch

Use the Yonico 16170 router bit to create a 1.65" radius concave bowl or crater-like indents at 1-3/4" diameter across and 1/4" deep. May be plunged deeper to create side walls or shallower for a smaller diameter. Blades meet in the center allowing true vertical plunging. CNC compatible. 1/16" thick carbide.

  • Brand: Yonico
  • ASIN: B00KZM2UEW
  • UPC: 765573828610
 - Uxcell a16042700ux0292 1/2 Inch x 1-1/4 Inch Carpenter Double Flute Round Nose Cove Box Router Bit Cutting Tool
Uxcell a16042700ux0292 1/2 Inch x 1-1/4 Inch Carpenter Double Flute Round Nose Cove Box Router Bit Cutting

Double fluted design for sharp and long lasting cutting. Used for routing, inlaying, mortising in wood and other soft materials. Use on hand-held and table-mounted portable routers (Routers are not included here).Cove box bit is designed for reading, fluting and general ornamentation. Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs.

  • Color: Blue, Silver Tone
  • Brand: uxcell
  • ASIN: B01IYJPQ3E
  • UPC: 602451755395
 - LETBUY 1/2 Inch Shank Bullnose Router Bit 5PCS,Half Round Bearing Carbide Tipped Round Edge Cutting Bits, Radius 1/8
LETBUY 1/2 Inch Shank Bullnose Router Bit 5PCS,Half Round Bearing Carbide Tipped Round Edge Cutting Bits, Radius 1/8" 3/16" 1/4" 5/16" 3/8", Woodworking Tool Milling Cutter CNC Router

Company: LETBUY-TECH is a company specialized in producing Tools for 12 years. Smart design and intelligent element are always created by our designers.All tools are bulit with High quality, durable and good for work. WE PROMISE: Lifetime FULL MONEY REFUND Warranty, and Any questions you have, please don't hesitate to contact us. We will get you back within 24hours. Product features: 1. This wood cutter is perfect for woodworking, edging, trimming, grooving, veining wood projects. 2. This high-grade YG6X original alloy router bits are built to last and are constructed using high quality materials, this durable router bit set will allow you to complete all your projects with confidence. 3. Cutter is suitable for woods, MDF, solid wood, particle board, plywood compact panel and more.However, please avoid to cut ferrous metal and non wood materials, such as steel, iron and sand. 4. Tungsten carbide tipped cutters make clean and accurate cuts on all types of wood to slice smoothly into stock producing clean and splinter free.Moreover, the router bits are housed in plastic case for easy storage, easy to carry out homework. 5. Adopt hard alloy, not only improve working efficiency, but also increase tool life. 6.High abrasion resistance, high precision grinding technology,strong and...

  • Color: 5 pcs
  • Brand: LETBUY-TECH
  • ASIN: B07PPBC1ND
 - Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece Set
Hiltex 10100 Tungsten Carbide Router Bits | 15-Piece

Solid carbide flush trim. " With Ball Bearing: Flush Trim Bit: 1/2"" Corner Round Bit:3/4"" 45DegreeChamfer Bit: 1/2"" Cove Bit:1/2"" Roman Ogee Bit:5/16"" ".

  • Color: Original Version
  • Brand: Hiltex
  • ASIN: B000KSOOLI
  • UPC: 732454011881
 - 4Pcs 1/4'' Shank Woodworking Round Nose Cove Core Box Router Bit Cutter Tool 6-12mm
4Pcs 1/4'' Shank Woodworking Round Nose Cove Core Box Router Bit Cutter Tool

Features Core box bit is designed for reeding, fluting,sign making and general round nose grooving.. It is especially effective in fluting flat surfaces. Steel bits that meet the high demands of Woodworking and Hardware. Tungsten Carbide Cutters. Specification Shank:1/4" Blade diameter: 1/4", 5/16", 3/8", 1/2" Package Include 4Pcs core box bits Note Please allow 1-2mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

  • Color: Round 4pcs 1/4"shank
  • Brand: SYPARTS TOOL
  • ASIN: B07JGMN8VQ
 - Whiteside Router Bits 1408 Round Nose Bit with 1/4-Inch Radius 1/2-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
Whiteside Router Bits 1408 Round Nose Bit with 1/4-Inch Radius 1/2-Inch Cutting Diameter and 1-1/4-Inch Cutting

Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside versus the competition and selected Whiteside as the winner for best router bits available in the market. Whiteside Machine Company was founded in 1970 as a general purpose machine shop in the basement of Bill & Bobbie Whiteside's home. Located in Western North Carolina near the furniture manufacturing town of Hickory, the company was often involved in making repairs or special parts for the furniture and woodworking field. A strong commitment to customer problem-solving, a can-do attitude, and innovative ideas, along with a growing core of dedicated employees, helped the business evolve into a manufacturer of woodworking equipment and tooling. Primarily through repeat business and referrals, the tooling business continued to grow to meet a demand for quality production router bits as well as custom application tooling. Today, Whiteside Machine occupies a 40,000 sq. ft. manufacturing facility and produces a complete line of solid carbide and carbide tipped router bits. Whiteside's quality, innovation, and customer commitment is still pr...

  • Brand: Whiteside Router Bits
  • ASIN: B000K2ADSM
  • UPC: 733353361220
 - CMT 814.627.11 Round Nose Bit, 1/2-Inch Shank, 1/4-Inch Radius, Carbide-Tipped
CMT 814.627.11 Round Nose Bit, 1/2-Inch Shank, 1/4-Inch Radius,

Decorate doors, drawer fronts, panels or any flat surface with this CMT round nose bit. Create grooves in any wood or wood composite. A favorite item for professional sign makers, craft makers and hobbyists. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4JN4K
  • UPC: 664252003068
 - Yonico 13117 Bullnose Router Bit with 3/8-Inch - 3/4-Inch Bead 1/2-Inch Shank
Yonico 13117 Bullnose Router Bit with 3/8-Inch - 3/4-Inch Bead 1/2-Inch

Use the Yonico Bullnose Router Bit 13117 for 3/8"r, 3/4" bead bullnose cuts. With double passes, this bit can also make 3/4" dowels. Two flute carbide cutters and 1/2" shank.

  • Brand: Yonico
  • ASIN: B00KZM0UXA
  • UPC: 735090542467

Get a Great Deal on 1/2 Shank Round Nose Router.‎

Looking for more 1/2 Shank Round Nose Router similar ideas? Try to explore these searches: 100d Remote, 10 2 Way Loudspeaker, and Skull Earring Set.


           

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.