Explore deals

1/2 Wedge



 - CONFAST 1/2
CONFAST 1/2" x 4-1/4" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 4-1/4"Thread LengthThe length of the threads on the anchor is 2-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to betw...

  • Brand: CONFAST
  • ASIN: B071ZDZ4Y7
 - CONFAST 1/2
CONFAST 1/2" x 3-3/4" Stainless Steel Wedge Anchor (25 per

ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 3-3/4"Thread LengthThe length of the threads on the anchor is 2-1/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft./l...

  • Brand: CONFAST
  • ASIN: B072MNR6VT
 - CONFAST 1/2
CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 5-1/2"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between ...

  • Brand: CONFAST
  • ASIN: B0723988J3
 - CONFAST 1/2
CONFAST 1/2" x 10" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 10"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 7-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 ...

  • Brand: CONFAST
  • ASIN: B071FFS8F1
 - Vince Camuto Women's Leera Pop Purple 10 M US
Vince Camuto Women's Leera Pop Purple 10 M

Enter the season in sleek chicness when you step out in the Vince Camuto® Leera wedge sandal. Reptile-embossed leather upper features floral accents. Ankle strap with buckle closure. Open toe. Synthetic lining. Lightly padded footbed. Jute wedge. Synthetic outsole. Imported. Measurements: Heel Height: 3 in Weight: 10 oz Platform Height: 1⁄2 in Product measurements were taken using size 7.5, width M. Please note that measurements may vary by size. Weight of footwear is based on a single item, not a pair.

  • Color: Pop Purple
  • Brand: Vince Camuto
  • ASIN: B07GH1T431
  • UPC: 190937590917
 - CONFAST 1/2
CONFAST 1/2" x 4-1/4" Stainless Steel Wedge Anchor (25 per

ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 4-1/4"Thread LengthThe length of the threads on the anchor is 2-1/2" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 - 60 f...

  • Brand: CONFAST
  • ASIN: B072K3G9F8
 - Strong Bolt STB2-50700 Wedge Anchor 1/2-Inch by 7-Inch, 25-Piece
Strong Bolt STB2-50700 Wedge Anchor 1/2-Inch by 7-Inch,

The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.

  • Brand: Simpson Strong-Tie
  • ASIN: B0091N7TUQ
  • UPC: 707392176022
 - CONFAST 1/2
CONFAST 1/2" x 7" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 7"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 4-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 -...

  • Brand: CONFAST
  • ASIN: B0711XRTQF
 - CONFAST 1/2
CONFAST 1/2" x 3-3/4" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 3-3/4"Thread LengthThe length of the threads on the anchor is 2-1/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between ...

  • Brand: CONFAST
  • ASIN: B071P6WLSS
 - CONFAST 1/2
CONFAST 1/2" x 8-1/2" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 8-1/2"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 5-3/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between ...

  • Brand: CONFAST
  • ASIN: B072PR8VXL
 - DREAM PAIRS Women's Black Low Wedge Sandals Dress Sandals Size 8.5 M US Formosa_8
DREAM PAIRS Women's Black Low Wedge Sandals Dress Sandals Size 8.5 M US

Add a fancy sparkle to your wordrobe with this gorgeous low platform wedges sandal! Featuring strap construction with lightly padded insole, and easy to slip on.

  • Color: 8-black
  • Brand: DREAM PAIRS
  • ASIN: B078F1CZ3Q
 - CONFAST 1/2
CONFAST 1/2" x 12" Wedge Anchor Zinc Plated (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 12"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 9-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 ...

  • Brand: CONFAST
  • ASIN: B0711XRWRM
 - CONFAST 1/2
CONFAST 1/2" x 4-1/4" Hot-Dipped Galvanized Wedge Anchor (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 4-1/4"Thread LengthThe length of the threads on the anchor is 2-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torq...

  • Brand: CONFAST
  • ASIN: B071LMWXJN
 - CONFAST 1/2
CONFAST 1/2" x 7" Hot-Dipped Galvanized Wedge Anchor (Box of

ApplicationsThe anchor is made from Carbon Steel, and is Hot-Dipped Galvanized. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Damp environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 7"Thread LengthThe length of the threads on the anchor is 4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 4-1/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to b...

  • Color: Grey
  • Brand: CONFAST
  • ASIN: B0714JZWWR
 - Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch, 25-Piece
Strong Bolt STB2-50512 Wedge Anchor 1/2-Inch by 5-1/2-Inch,

The Strong-Bolt 2 wedge anchor is the next generation solution for cracked and uncracked concrete. Following rigorous testing according to ICC-ES acceptance criteria, the Strong-Bolt 2 anchor received classification as a Category 1 anchor, the highest attainable anchor category for performance in cracked concrete under static and seimic loading. Code listed by ICC-ES under the 2009 IBC requirements for post-installed anchors in cracked and uncracked concrete.

  • Brand: Simpson Strong-Tie
  • ASIN: B0091N7TTM
  • UPC: 707392648529
 - CLARKS Women's Annadel Eirwyn Wedge Sandal, Black Nubuck, 7.5 M US
CLARKS Women's Annadel Eirwyn Wedge Sandal, Black Nubuck, 7.5 M

Your staple shoe for spring/summer. the front cross band elongates legs while the adjustable hook and look closure wraps the back of your foot. these are flattering sandals for everyone. these wedges have some platform built into the height and come with clarks comfort soft technology. so they are comfortable and beautiful

  • Color: Black Nubuck
  • Brand: CLARKS
  • ASIN: B01FH9BXPY
  • UPC: 889305857324
 - CONFAST 1/2
CONFAST 1/2" x 5-1/2" Stainless Steel Wedge Anchor (25 per

ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. EnvironmentThe anchor is designed for use in a Wet environment.Hole Diameter/Bit DiameterThe anchor requires a 1/2" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/2".Length Anchor The length of the anchor is 5-1/2"Thread LengthThe length of the threads on the anchor is 3-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 2-1/4". Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4". This will ensure that the minimum embedment of 2-1/4" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/2" diameter anchor requires the hole in the fixture to be 5/8".Torque ValueTo be set properly in the concrete, the anchor must be torqued to between 50 - 60 f...

  • Brand: CONFAST
  • ASIN: B072185T6T
 - Simpson Strong Tie Simpson STB2-50512R10 Strong-Bolt 1/2
Simpson Strong Tie Simpson STB2-50512R10 Strong-Bolt 1/2" by 5-1/2" Wedge Anchor, (10per

The mechanical anchor is designed to install easily securely in a variety of base materials including concrete, brick, hollow and grouted cmu.

  • Brand: Simpson Strong-Tie
  • ASIN: B079SL7FHX
  • UPC: 707392495550
 - (10) Galvanized Concrete Wedge Anchor Bolts 1/2 x 10 Includes Nuts & Washers
(10) Galvanized Concrete Wedge Anchor Bolts 1/2 x 10 Includes Nuts &

Lot of (10) wedge anchor bolts. These galvanized anchors are 1/2-13 thread and are 10" in length. Nuts and flat washers are included.

  • Brand: Lexar Industrial
  • ASIN: B01N2ADZD2
 - Simpson Strong Tie Wa50414 1/2-Inch by 4-1/4-Inch with 2-13/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece
Simpson Strong Tie Wa50414 1/2-Inch by 4-1/4-Inch with 2-13/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor,

The Wedge-All wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

  • Brand: Simpson Strong-Tie
  • ASIN: B009YNX53S
  • UPC: 044315538612

Get a Great Deal on 1/2 Wedge.‎

Looking for more 1/2 Wedge similar ideas? Try to explore these searches: 18 Kyosho Diecast Model, Knife Blade Cover, and Easy Swimming Pool.


           

Dewalt DW511 Hammer Drill and Redhead Wedge Anchor Bolts

1/2 Wedge

DeWalt DW511 1/2" variable speed hammer drill: Amazon.com: http://amzn.to/19A8Mfw Redhead Anchor Wedge Bolts: Amazon.com: http://amzn.to/17mJA7R This video demonstrates the DeWalt DW511 variable speed hammer drill and shows how to use Redhead 1/2" x 5 1/2" Wedge Anchor Bolts. Free 30 day tri...

Tags: DeWalt DW511,Redhead,Wedge Anchor Bolts,Hammer ...

How to Install Concrete Wedge Anchors

1/2 Wedge

How to install concrete wedge anchors. http://www.confast.com/products/thunderstud-anchor.aspx

Tags: red head wedge anchors,red head wedge anchor,ma...

Mechanical Engineering: Ch 11: Friction (21 of 47) The Wedge: Ex.1 Part 1/2 Pending Motion Up

1/2 Wedge

Visit http://ilectureonline.com for more math and science lectures! In this video I will find F=?, force needed to act on an 8 degree wedge to just begin to lift up a block (Part1/2). Next video in this series can be seen at: https://youtu.be/4kxOnBJ9tgI

Tags: ilectureonline,ilectureonline.com,Mike,Mike van...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.