Explore deals

Electronic Brake Fluid Tester



 - ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid
ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake

How to Use: 1. Turn on the brake fluid tester by pressing the button on top. A green light should light up. If the light does not come on, it may be time to change a battery 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly 5. The tester will automatically power off after 12 seconds of inactivity What to Do: The LED lights will indicate the percentage of water in the brake fluid: - Green: No water - Green/Yellow: Less than 1% of water - Green /Yellow/Yellow: Approx.2% of water - Green/Yellow/Yellow/Red: Approx.3% (Brake fluid should be changed) -Green/Yellow/Yellow/Red/Red: Approx.4% (Brake fluid must be changed urgently!) Please Note: The ITEQ brake fluid tester is calibrated for DOT4 and DOT3 brake fluids, and DOT4 is used in most cars produced since 2006 Replace the battery if the green LED indicator no longer lights up after you press the button Wash the test probe with tap water after every use In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water Do not expose brake fluid t...

  • Color: Black
  • Brand: ITEQ
  • ASIN: B076SC377J
  • UPC: 607111538110
 - ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 with LED Indicator
ALLOSUN EM2272A Black All- Sun Portable Fluid Tester Auto Brakes Calibrated for DOT3 DOT4 DOT5.1 with LED

Staying safe and knowing that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.

  • Color: Black
  • Brand: ALLOSUN
  • ASIN: B06Y42GSDW
  • UPC: 788537553779
 - Automotive Brake Fluid Tester Oil Inspection Goose Neck Detector Sound and Light Double Alarm (DY23B)
Automotive Brake Fluid Tester Oil Inspection Goose Neck Detector Sound and Light Double Alarm

Operation Manual: 1. Install one 9V(6F22) battery at the back of tester.(battery not include) 2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, indicates the product self-test is successful. 3. Press SELECT button, it will locate DOT3 model automatically. 4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs. 5. Immerse the probe into brake fluid, the different colored LED lights mean as below: --Green Light: indicates the brake fluid water content is below 1% --The First Yellow Light: indicates the brake fluid water content is approximately 1.5% --The Second Yellow Light: indicates the brake fluid water content is approximately 2.5% --The First Red Light: indicates the brake fluid water content is approximately 3% --The Second Red Light: indicates the brake fluid water content is more than 4% 6. Press POWER button to turn off the tester. Note: 1. After use, please clean the probe and avoid any retention of stains that might affect the test. 2. If in use for a long time, best to remove all batteries and store in a dry place at normal room temperature. Package include: 1x Brake fluid tester 1x User manual (in English) battery not include

  • Color: DY23B
  • Brand: Mrcartool
  • ASIN: B07M9BX388
  • UPC: 733810028543
 - BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with High-Precision Probe for Auto DOT3 DOT4 DOT5 Brake Fluid Diagnostic Detector
BELEY Automotive Brake Fluid Tester Oil Moisture Water Detection with High-Precision Probe for Auto DOT3 DOT4 DOT5 Brake Fluid Diagnostic

Operation Manual:1. Install one 9V(6F22) battery at the back of tester. (battery not include)2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding,indicates the product self-test is successful.3. Press SELECT button, it will locate DOT3 model automatically.4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.5. Immerse the probe into brake fluid, the different colored LED lights mean as below:Green Light: indicates the brake fluid water content is below 1%The First Yellow Light: indicates the brake fluid water content is approximately 1.5%The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%The First Red Light: indicates the brake fluid water content is approximately 3%The Second Red Light: indicates the brake fluid water content is more than 4%6. Press POWER button to turn off the tester.Note:1. After use, please clean the probe and avoid any retention of stains that might affect the test.2. If in use for a long time, best to remove all batteries and store in a dry place at normal room temperature.Package Includes:1x Brake fluid tester1x User manual (in English)battery not included

  • Brand: BELEY
  • ASIN: B07KQZ4Y4T
  • UPC: 714583379230
 - PTE Tester Calibrated for for DOT 4 Brake fluids
PTE Tester Calibrated for for DOT 4 Brake

Staying safe and knowing that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid. What to do: 1. Turn on the brake fluid tester by pressing the button. A green light should light up. If the light does not come on, it may be time to change a battery. 2. Unscrew the lid for the brake fluid reservoir, and take off the cap for the brake fluid tester. 3. Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid. 4. After testing, remember to screw the lid of the brake fluid reservoir back on tightly. 5. The tester will automatically power off after 12 seconds of inactivity. The LED lights will indicate the percentage of water in the brake fluid: Green: None Green/Yellow: Less than 1% Green /Yellow/Yellow: Approx. 2% Green/Yellow/Yellow/Red: Approx. 3% (Time to change brake fluid.) Green/Yellow/Yellow/Red/Red: Approx. 4% (Change brake fluid immediately). Please note:- This bra...

  • Color: Calibrated
  • Brand: PTE
  • ASIN: B005HVG4GQ
 - eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 DOT4 with 5 LED Indicator
eOUTIL MT300 Brake Fluid Tester Automotive Diagnostic Testing Tool Auto Brakes Calibrated For DOT3 DOT4 with 5 LED

Product FeatureThe tester can be used as a digital brake fuild tester suitable for detemining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid"operation manuals1.Slide the clip,install 1 pcs AAA batteries2.Remove the tester cap,press the top button,LED lights green3.Put the tester pins into the brake fluid,LEDs light and show the moisture range detected 4.Press the top button again to turn it off,clean the pins,replace the capcertificationCE/EMCSGS report

  • Color: black
  • Brand: eOUTIL
  • ASIN: B075K6YHDG
  • UPC: 799355563109
 - Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes Calibrated For DOT3 DOT4 DOT
Brake Fluid Tester VXSCAN Auto Tools Diagnostic Testing Tool with 5 LED Indicator Automotive Brakes Calibrated For DOT3 DOT4

Brake Fluid Tester Installation Steps: 1.Turn on the brake fluid tester by pressing the button for power on. Green LED will light up. If the light does not come on, it may be time to change a battery. 2.Unscrew the lid for the brake fluid reservoir and take off the cap for the brake fluid tester. 3.Dip the test probes into the brake fluid and the LED lights will indicate the percentage of water in the brake fluid. 4.After testing, remember to screw the lid of the brake fluid reservoir back on tightly. Indications: Green: Battery OK, i.e.: No Water Contained in the Brake Fluid; Yellow: Less than 1% of Water Content in Brake Fluid; Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid; Yellow/Yellow/Red: Approximately 3% of Water Content in Brake Fluid; The Brake Fluid Should be Changed; Yellow/Yellow/Red/Red: at least 4% of Water Content in Brake Fluid; The Brake Fluid Must be Changed Urgently, Extreme Danger. Please Note:Replace the battery if the green light doesn't come on anymore ;Wash the test probe with tap water after every use to keep;In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water ;Do not expose brake fluid to the atmosphere for a long time as it is highly hygroscopic. Package including: 1pc x Brake Fluid Te...

  • Color: black
  • Brand: VXSCAN
  • ASIN: B077S3RZZH
  • UPC: 889327022205
 - OTC Tools 4598-DOT3 DOT 3 Brake Fluid Tester
OTC Tools 4598-DOT3 DOT 3 Brake Fluid

The OTC 4598-DOT3 helps you catch bad brake fluid before it has time to destroy expensive brake calipers and other brake system components. It determines the quality of brake fluid and measures moisture from 0%-4%. Features LED lights to show moisture percentage, and automatically shuts off after 12 Seconds. 1.5V AAA battery included. Usage Instructions: 1) Remove cap from brake fluid reservoir; 2) Remove probe cap from brake fluid tester; 3) Press power button on top of tester. Green LED lights up; 4) Dip entire length of metal probes into brake fluid; 5) After one second, match color of LEDs with color chart to determine brake fluid quality. Tester automatically powers off after twelve seconds of inactivity.

  • Brand: OTC
  • ASIN: B00VX0LAQY
  • UPC: 731413579714
 - ITEQ Tire Patch Roller Wooden Handle 1 1/2
ITEQ Tire Patch Roller Wooden Handle 1 1/2" Dia Tire Repair

The only thing worse than having a flat tire is the patch you just applied didn't hold because there was an air bubble under the patch that prevented it from fully sealing This ITEQ Tire Patch Roller helps prevent this by allowing you to provide penetrating pressure over the patch as it vulcanizes and cures to force out trapped air bubbles that could compromise your patching job A few passes with the 1 1/2-inch diameter wheel and firm pressure lets the gear-like teeth press into the patch and force out air while also more securely adhering the patch Package 1 x ITEQ Tire Patch Roller

  • Brand: ITEQ
  • ASIN: B07D3MF3NX
  • UPC: 607111538295
 - Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid - Black
Brake Fluid Tester Pen, eOUTIL Hydraulic Fluid/Liquid/Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid -

eOUTIL Brake Fluid Tester eOUTIL brake fluid tester can be used as a digital brake fluid tester suitable for determining brake fluid quality. Developed for professional use in automotive repair shops and in servicing. Quality is tested and indicated on five LEDs in terms of "percent of water in the brake fluid".Ready for Brake Fluid Test Unscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device. To Check Fluid Quality Press the button for power on, the green LED will light up. Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity. Product Labelling Indication:Green: Battery OK, i.e.: No water contained in the brake fluid.Yellow: Less than 1% of water content in brake fluid.Yellow/yellow: Approx. 2% of water content in brake fluid. Yellow/yellow/red: Approx.3% of water content in brake fluid. The brake fluid should be changed. Yellow/yellow/red/red: At least 4% of water content in brake fluid. The brake fluid must be changed urgently! Extreme danger! Battery: One 1.5V , type AAA Attention:1. Replace the battery if the gr...

  • Brand: eOUTIL
  • ASIN: B07QZ2LD1T

Get a Great Deal on Electronic Brake Fluid Tester.‎

Looking for more Electronic Brake Fluid Tester similar ideas? Try to explore these searches: Insect Trap Coating, Fiddle Tunes Sheet Music, and Pattern Fancy Wedding Band.


           

TESTING AMAZONS CHEAPEST BRAKE FLUID TESTER

Electronic Brake Fluid Tester

TESTING AMAZONS CHEAPEST BREAK FLUID TESTER. You cant tell just by looking. Dont wait till its to late Here is link to tester pen: https://amzn.to/2CJxE9c

Tags: break fluid,brake fluid,brake fluid flush,when ...

Brake Fluid Tester Pen - Cheap but Will it work ?

Electronic Brake Fluid Tester

Cheap Ebay brake fluid tester pen. Here i test the pen to see if it really works. Full test and review.

Tags: brake fluid pen,Brake Fluid Tester Pen - Cheap ...

Review: OEMTOOLS Brake Fluid Tester 25269

Electronic Brake Fluid Tester

Product link: https://mobiledistributorsupply.com/25269-brake-fluid-tester-dot-3-dot-4-dot-5-1-oem.html Video review on a electronic brake fluid tester made by OEMTOOLS from Mobile Distributor Supply. It features a green and black plastic exterior, very compact, runs off a single AAA battery, po...

Tags: 4DIYers,tutorial,how,diy,guide,mechanic,video,b...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.