Explore deals

Graves Yamaha R6



 - Graves Motorsports Smog Block Off Plates for Yamaha R6 2017
Graves Motorsports Smog Block Off Plates for Yamaha R6

Graves Motorsports Smog Block Off Plates for Yamaha model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold as set shown. Fitment: Yamaha R1 / R1M / R1S 2004-2017 + R6 2003-2017 + FZ-10 2017 + R6S 2006-2009 + FZ1 All + FZ8 All + FZ6 All The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike; 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection syst...

  • Brand: Graves Motorsports
  • ASIN: B072FNDT3W
 - 06-16 YAMAHA YZF-R6: Graves Yamaha Exup Eliminator
06-16 YAMAHA YZF-R6: Graves Yamaha Exup

Simple plug-and-play application allows the removal of the Exup valve and motor without the "Check Engine light" being activated when using a full racing exhaust.Fits:YAMAHAFZS1000 06-15, VMX17 09-19, YZF-R1 02-19, YZF-R1M 15-19, YZF-R1S 16-18

  • Brand: Graves Motorsports
  • ASIN: B007D62G74
 - Driven Racing (DSBlock 2) Black Exhaust Smog Block-Off Plate
Driven Racing (DSBlock 2) Black Exhaust Smog Block-Off

Driven Smog Block Off Plates are designed to eliminate the back fires from your bikes exhaust caused when unburned fuel and air meet the hot chamber temperatures in a bikes exhaust. The plates cap off the injection of air into the exhaust cycle to help reduce or eliminate the back fire situation through capping off of the air lines from the PAIR valve. This is most commonly encountered after the use of a Power Commander or like product is installed on a motorcycle and the fuel maps have been changed for increased performance. These plates will help the motorcycle to run smoother as well as enable a more precise mapping of the motorcycles fuel system. These plates are made from 6061 aluminum and anodized black for durability and corrosion resistance. The package will include the plates, a rubber air box cap, and basic instructions to bypass the pair valve air lines. These are intended for off road, closed course, competition motorcycles only. Please consult your local laws before use on a motorcycle for public streets.

  • Color: Black
  • Brand: Driven Racing
  • ASIN: B0041QUO3C
  • UPC: 748264548592
 - 03-19 YAMAHA YZF-R6: Graves Smog Block Off Plates
03-19 YAMAHA YZF-R6: Graves Smog Block Off

Unfortunately, by doing this, the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.This addition will typically remove the majority of popping on deceleratio

  • Brand: Graves Motorsports
  • ASIN: B007D63EWK
 - 06-16 YAMAHA YZF-R6: Graves Seat Foam Pad
06-16 YAMAHA YZF-R6: Graves Seat Foam

9.5 mm thick. Adhesive backing.Fits:YAMAHAYZF-R6 06-16

  • Brand: Graves Motorsports
  • ASIN: B007D63FL0
 - 99-19 YAMAHA YZF-R6: Graves Sport Bike Rear Brake Return Spring
99-19 YAMAHA YZF-R6: Graves Sport Bike Rear Brake Return

The simple solution to the problem of the rear brake dragging.Fits:SUZUKIGSXR1000 01-16, GSXR600 97-19, GSXR750 96-19YAMAHAYZF-R1 98-14, YZF-R1L 06, YZF-R6 99-19, YZF-R6S 06-09

  • Brand: Graves Motorsports
  • ASIN: B007D62962
 - 06-19 YAMAHA YZF-R6: Graves Progressive Throttle Tube
06-19 YAMAHA YZF-R6: Graves Progressive Throttle

6061 aluminum construction.Fits:KAWASAKIZX10R 16-18, ZX10RABS 16-18, ZX10RR 17-18YAMAHAFZ-09 14-17, FZ-10 17, FZ6R 09-17, FZ8 11-13, FZS1000 01-15, MT-09 18-19, MT-10 18-19, XSR900 16-19, YZF-R1 09-19, YZF-R1M 15-19, YZF-R1S 16-18, YZF

  • Brand: Graves Motorsports
  • ASIN: B007D63GNM
 - 06-18 YAMAHA YZF-R6: Graves Cat Back Slip-On Exhaust (Stainless Steel/Carbon Can/Standard Titanium End Cap)
06-18 YAMAHA YZF-R6: Graves Cat Back Slip-On Exhaust (Stainless Steel/Carbon Can/Standard Titanium End

The Cat Back Slip-on was designed as a cost effective alternative to give your sportbike a boost in power, looks and sound without the costs of a full exhaust or cat-removing exhaust. Graves Motorsports' exclusive "Everlast" packing produces an exhaust no

  • Brand: Graves Motorsports
  • ASIN: B01DSKJM1Q
  • UPC: 638865539368
 - EXUP Eliminator by Graves Motorsports - Yamaha YZF-R6 2017-2019 - DBYACC562518
EXUP Eliminator by Graves Motorsports - Yamaha YZF-R6 2017-2019 -

Graves' EXUP Eliminator is an electrical plug that connects to the factory harness when a Graves Race Exhaust System is used that eliminates the EXUP Valve. The EXUP eliminator communicates with the factory electronics, eliminating the check engine light from coming on when the EXUP valve is removed. The small compact design allows a cleaner appearance. FITMENT : DBY-ACC56-25-18 YZF-R6(2019, 2018, 2017)

  • Brand: Graves Motorsports
  • ASIN: B07NQKKQ54
  • UPC: 076625380582
 - Graves Motorsports Yamaha R6 Cat-Back Slip-on Exhaust 2006 - 2015
Graves Motorsports Yamaha R6 Cat-Back Slip-on Exhaust 2006 -

Graves Motorsports Yamaha R6 Carbon Slip-On. Graves Motorsports hand-made in the USA Carbon slip-on Silencer for the 06-15 R6. This slip-on exhaust is new from the ground up with record breaking race developed features. Graves' precise engineering develops precision products that are designed to outlook, outperform and outlast the competition. New Can Design Featuring: Carbon Fiber Sleeve with Titanium End Cap and stainless steel exhaust tubing. Strapless can design mounts without the use of strap bands around the can using a tap mounted bracket that's integrated into the can. This design not only streamlines looks of your bike and saves weight.

  • Brand: Graves Motorsports
  • ASIN: B001V9BCLA
 - 05-18 YAMAHA YZF-R6: Graves 7 Degree Clip-Ons (50mm) (Black)
05-18 YAMAHA YZF-R6: Graves 7 Degree Clip-Ons (50mm)

The Graves Motorsports Clip-On Motorcycle Handlebars are CNC-machined from 7075-T6 billet aluminum for superior strength and rigidity.Fits:APRILIARS250 96-02DUCATIMON1000 04-05, MON1000S 03-05, MON600 01, MON620 04-06, MON620IE 02, MON

  • Color: Black
  • Brand: Graves Motorsports
  • ASIN: B006ZAHBD8
 - 99-19 YAMAHA YZF-R6: Graves Rear Axle Alignment Tool
99-19 YAMAHA YZF-R6: Graves Rear Axle Alignment

The Rear Axle Alignment Tool is made from ultra-durable Delrin and is used to push your rear axle out and hold your rear brake caliper mount in place while your rear wheel is removed.Fits:YAMAHAYZF-R1 98-19, YZF-R1L 06, YZF-R1M 15-19, YZF-R1S

  • Brand: Graves Motorsports
  • ASIN: B007NQMFNY
 - 06-19 YAMAHA YZF-R6: Graves Slotted Cam Sprockets
06-19 YAMAHA YZF-R6: Graves Slotted Cam

Allows for precise cam timing to achieve maximum performance.Fits:YAMAHAYZF-R6 06-19

  • Brand: Graves Motorsports
  • ASIN: B007KBAY8U
 - 99-18 YAMAHA YZF-R6: Graves 3-In-1 Socket (R6)
99-18 YAMAHA YZF-R6: Graves 3-In-1 Socket

Anodized black. Note: 1/2 inch.Fits:YAMAHAYZF-R6 99-19, YZF-R6S 06-09

  • Brand: Graves Motorsports
  • ASIN: B007NQMGBA
 - 17-18 YAMAHA YZF-R6: Graves Yamaha Exup Eliminator
17-18 YAMAHA YZF-R6: Graves Yamaha Exup

Simple plug-and-play application allows the removal of the Exup valve and motor without the "Check Engine light" being activated when using a full racing exhaust.Fits:YAMAHAYZF-R1 04-06, YZF-R1L 06, YZF-R6 17-18

  • Brand: Graves Motorsports
  • ASIN: B007D62FSO
 - EXUP Eliminator for Yamaha
EXUP Eliminator for Yamaha

Simple plug-and-play application prevents the check engine light from being activated when using a racing exhaust. Unlike other similar products, this product uses an internal microprocessor which allows your fuel map to run as the factory intended and not produce an altered, flat, or incorrect fuel map. Made In USA. Fits the following motorcycle models: Yamaha APEX [Snowmobile] (2011-2018) Yamaha FZ1 (2006-2015) Yamaha FZ10 (2017-2018) Yamaha FZS1 (2015) Yamaha MT-10 (2018) Yamaha R1 (2002-2018) Yamaha R1M (2015-2018) Yamaha R1S (2016-2018) Yamaha R6 (2006-2018) Yamaha Raider (2008-2017) Yamaha V-Max (2009-2018) Yamaha WR250R (2008-2018) Yamaha WR250X (2008-2018) Yamaha WR25R (2014-2018) Yamaha XV19 [All Models] (2006-2017)

  • Brand: SpeedoDRD
  • ASIN: B07BGCH43M
  • UPC: 855080008091
 - FTEcu Yamaha Active Tune AFR Self Tuning ECU Kit Yamaha R6 2017
FTEcu Yamaha Active Tune AFR Self Tuning ECU Kit Yamaha R6

FTEcu Yamaha Active Tune AFR Self Tuning ECU Kit. This Kit lets your FTECU equipped bike tune itself as you ride! Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements. This breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor. This kit requires: Data-Link ECU Flashing Kit ( bike harness required for tuning / data acquisition ) Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs) Smog block-offs or disabled AIS valve (Graves Smog Block Off Part Numbers : R1 / FZ10 (all) /R6 (2017) = AB011 / FZ09 + XSR900 = AB015 / FZ07 (N/A) Yamaha R6 2017 Note: You will need an 18x1.5mm Lamda Collar in your R6 exhaust for this installation this does not come on the stock exhausts but standard on Graves Full Exhaust Systems.

  • Brand: Graves Motorsports
  • ASIN: B0711XRB29
 - 06-16 YAMAHA YZF-R6: Graves Bar End Mirror Adapter For Bar Ends
06-16 YAMAHA YZF-R6: Graves Bar End Mirror Adapter For Bar

Works seamlessly with the Graves bar end kits to allow mounting of popular aftermarket handlebar bar-end mirrors.Fits:YAMAHAYZF-R1 04-14, YZF-R1L 06, YZF-R6 06-16

  • Brand: Graves Motorsports
  • ASIN: B006ZAHAT8
 - Fender Eliminator Yamaha YZF R6 1999-2008 +
Fender Eliminator Yamaha YZF R6 1999-2008

Lifetime Warranty To Original Purchaser, Buy With Confidence New Fender Eliminator For: Yamaha YZF R6 1999-2005 Yamaha R6S 2006 2007 2008 Only Check Us Out At Railside Performance For Other Years & Flip Plates In no event shall Railside Performance be liable for any direct, indirect, incidental, punitive, consequential or any other damages whatsoever, whether in action or under contract, tort or otherwise. Under no circumstance, including, but not limited to, negligence, shall Railside Performance be liable for any damages that result from the use of, or inability to use, the information, materials or products contained in or purchased from this site. Buyer responsible for any Duties or customs fees

  • Brand: Railside Performance
  • ASIN: B07B67TD48
  • UPC: 653785052797
 - YAMAHA ABA-0SS56-21-65 Graves Motorsports Exup Eliminator WR250R
YAMAHA ABA-0SS56-21-65 Graves Motorsports Exup Eliminator

Graves EXUP Eliminator is an electrical plug that connects to the factory harness. When a Graves race exhaust system is used that eliminates the EXUP Valve. The EXUP eliminator communicates with the factory electronics eliminating the check engine light from coming on when the EXUP valve is removed. The small compact design allows a cleaner appearance. Fits most Yamaha motorcycles equipped with the EXUP exhaust valve, including '02-'08 R1, '06-'11 R6, '08-'09 WR250R/WR250X and '06-'11 FZ1.

  • Brand: YAMAHA
  • ASIN: B005C5DLCW
  • UPC: 718721183178
 - Graves Motorsports Yamaha R6 Frame Sliders - No Cut 2008-2014
Graves Motorsports Yamaha R6 Frame Sliders - No Cut

Graves Motorsports Yamaha R6 Frame Sliders - No Cut. Graves Motorsports No Cut frame savers for the 08-14 Yamaha R6 are designed to help project your motorcycle and expensive bodywork in the event of a low speed crash or tip over. Graves Frame slider kits are engineered on the race track for precise fitment. All frame savers are available with Black or White pucks and customers can also select from Standard or Long length options (Use the pull down menu to select your desired setup). Performance sport bike parts and accessories from Graves Motorsports. Fitment: Yamaha R6 2008-2014 (includes adapters so no cutting of the bodywork is required)

  • Brand: Graves Motorsports
  • ASIN: B006ZAICGI
 - 17-19 YAMAHA YZF-R6: Graves WORKS Steering Damper Mount
17-19 YAMAHA YZF-R6: Graves WORKS Steering Damper

Graves Motorsports Steering Damper Mount.Fits:YAMAHAYZF-R6 17-19

  • Color: Black
  • Brand: Graves Motorsports
  • ASIN: B072LTTS6J
 - YEC Racing 2C0-A2110-70 - Valve Spring Set for Yamaha R6
YEC Racing 2C0-A2110-70 - Valve Spring Set for Yamaha

YEC Racing Parts is the only officially approved supplier of racing parts for Yamaha R-series machines, and the company has developed a range of high-performance YEC Racing Parts for the R1 and R6.The business is wholly owned by Yamaha, and therefore you can be sure that every YEC Racing Part is designed and manufactured to enhance the performance of the stock R1 and R6 for racing.

  • Brand: YEC Racing Parts
  • ASIN: B01M029XFF
 - FlashTune ECU Type 18 Yamaha R6 2017 Bench Tuner Kit
FlashTune ECU Type 18 Yamaha R6 2017 Bench Tuner

The 2017 Yamaha R6 / 2015-2017 Yamaha R1 / R1M / R1S + 2017 FZ10 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. Fitment: Yamaha R6 2017 / Yamaha R1 2015-2017 / R1M 2015-2017 / R1S 2016-2017 / Yamaha FZ10 2017 This Interface allows you to easily adjust the following! Remove ECU Restrictions High Load Fuel Maps (PC5 map importing) Low Load (cruising) Fuel Maps and Bias Mapping Fuel Injector Proportioning Engine Braking adjustments Cylinder Specific Ignition Timing Variable Stack RPM Adjustment Cooling Fan Temp Adjustment Remove Top Speed Limiter Steering Damper Elimination EXUP Valve Elimination Force AIS Valve Closed *This kit is also compatible with the R1M and R1S and new features are added regularly. We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able ...

  • Brand: Graves Motorsports
  • ASIN: B071J1L5BG
 - 06-16 YAMAHA YZF-R6: Graves Ohlins Steering Damper Mount
06-16 YAMAHA YZF-R6: Graves Ohlins Steering Damper

This must be done in order for the steering damper to mount properly. The key switch will have to be replaced with a toggle switch mounted on the fairing bracket. This item is for RACE ONLY. It is a limited edition, Team Graves Yamaha factory racing part,

  • Color: Black
  • Brand: Graves Motorsports
  • ASIN: B0099RH0BW

Get a Great Deal on Graves Yamaha R6.‎

Looking for more Graves Yamaha R6 similar ideas? Try to explore these searches: Ford Window Sticker, Skyline Furniture Black California Headboard, and Wheat Bran Flakes.


           

Graves Motorsports Yamaha R6 Race Sport Bike Build - Part 1

Graves Yamaha R6

Graves Motorsports' crew chief Gary Dean, taking apart a Yamaha R6 from stock to get it ready for Daytona Sportbike bike build. This video is sped up in real time to show the precise dis-assembly of the Yamaha R6 on the way to becoming a world class certified race machine. Part two of this video ...

Tags: graves motorsports,racing,yamaha r6,daytona spo...

Install Video : Graves Motorsports 2017 Yamaha R6 Cat Back Slip-on Exhaust

Graves Yamaha R6

Installation video of the 2006-2017 Yamaha R6 Cat-Back Slip-on Exhaust from Graves Motorsports demonstrated on the 2017 Yamaha R6. Available at www.gravesport.com

Tags: r6 exhaust,install video,yamaha r6 exhaust inst...

Graves Yamaha, YZF-R6 Red Flag Rebuild

Graves Yamaha R6

It's always amazing to see teams leap into motion when things go haywire. At New Jersey Motorsports Park, Tommy Aquino had a rather bazaar crash in the last corner. His bike spit him off and upright-ed itself, ghost riding into the wall along the pitwall side of the straightaway. After convincing...

Tags: Graves Yamaha,YZF-R6,NJMP,Tommy Aquino Crash

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.