Explore deals

Slide Rail Kit Snap



 - Classic Wood Center Mount Drawer Slide
Classic Wood Center Mount Drawer

These classic drawer slides can be adapted to fit most applications. Slides are 22'' long but can be cut to length if needed. Cabinet part is usually 1/2" longer than drawer part, both included. Slide comes undrilled, allowing for customization. 22'' length 3/4'' thick when both slide parts are assembled. A high tech kiln drying method eliminates warpage ensuring a quality product. Slide parts interlock preventing drawers from tipping fully extended. Made from beech or maple hardwood.

  • Color: 1 / PACK
  • Brand: Rockler
  • ASIN: B001DT15YM
 - Olsa Tools 3-Piece Aluminum Socket Organizer 1/4-Inch, 3/8-Inch, 1/2-Inch Drive Socket Rails Hold 54 Sockets | Premium Quality Socket Holders (Black)
Olsa Tools 3-Piece Aluminum Socket Organizer 1/4-Inch, 3/8-Inch, 1/2-Inch Drive Socket Rails Hold 54 Sockets | Premium Quality Socket Holders

Where is “the” socket you need when you try to find it? Are all your sockets in one spot but unorganized therefore wasting your valuable time searching for the right one? Maybe you’ve just lost them? Whatever your situation, you do not have to be unprepared. The Olsa Tools 3 Pcs Kit Aluminum Socket Rail System holds 54 sockets (20 x 1/4” clips | 18 x 3/8” clips | 16 x 1/2” clips) so that you never lose your sockets again! It also allows for a quick find of “the” socket you need when you need it! Holds your sockets and makes it easy to put on and remove The spring loaded ball bearing clips hold the sockets tightly in place and will keep them on holder even in upside down applications. Can be used with shallow and deep sockets. Keyhole slot makes it easy to install the socket rail to the wall or workbench. This kit includes -(1) BLACK 1/4 in. Drive Socket Holder + 20 pieces 1/4" Socket Clips -(1) BLACK 3/8 in. Drive Socket Holder + 18 pieces 3/8" Socket Clips -(1) BLACK 1/2 in. Drive Socket Holder + 16 pieces 1/2" Socket Clips *SOCKETS NOT INCLUDEDYou can now buy Extra Clips in packages of 10! Check out ASINs: B01M8KJOFY, B01M2ZGUXV, B01M5DKVDMStop losing your sockets and have them organized so you quickly find the one you need! The Olsa Tools 3 Pcs Kit S...

  • Color: Black
  • Brand: Olsa Tools
  • ASIN: B01N0ZYPKH
  • UPC: 628055856290
 - Kreg Tool Company KHI-HINGE Concealed Hinge Jig
Kreg Tool Company KHI-HINGE Concealed Hinge

The Concealed hinge jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the concealed hinge jig works with an ordinary drill and the included carbide Tipped bit.

  • Brand: Kreg Tool
  • ASIN: B01JQ74FMQ
  • UPC: 647096806651
 - BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars
BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting

If you have a miter saw, then the PM-4000 folding miter saw stand is exactly what you need. Designed to work with nearly every make and model miter saw or chop saw, this strong, stable stand will allow you to setup wherever you wish – quickly, easily, and safely. Whether it’s a jobsite or your driveway, you’ll appreciate being able to work exactly where you need to. This is a contractor grade miter saw stand, but priced for the homeowner. But don’t let the low cost fool you – this is a high quality piece of equipment, with tubular steel construction, and a whopping 500lb capacity, so you can handle the big jobs with ease. The quick attach mounts make attaching and detaching the saw simple, and the adjustable 13” tall material supports can be in or out to support material ten feet long. But here’s the kicker – it’s not only lightweight, but it folds up for easy transport and storage, making this one of the most versatile miter saw stands on the market. An optional Wheel Kit is available (PM-7004) for added mobility, and extra tool mounts (PM-7002 – 20-in long and can be adjusted along the width to fit most saws) are also available allowing you to expand the use of your stand to other tools in your shop.

  • Color: Orange
  • Brand: Bora
  • ASIN: B002HORLUO
  • UPC: 878258005838
 - Aulett Home Frameless Shower Door Bottom Seal with Drip Rail - 3/8
Aulett Home Frameless Shower Door Bottom Seal with Drip Rail - 3/8" x 36" Sweep - Glass Door Seal Strip to Stop Shower

Original goods ONLY sold by Aulett Home! ENJOY A DRY BATHROOM FLOOR Shower door sweep for 3/8" thick frameless glass doors with a new design. The quality is proven in Germany, so this seal will keep the water in the shower and you can just relax.. HIGH QUALITY MATERIALS The seal consists of 2 types of vinyl: hard PVC for the part that grips the glass and soft PVC for the fins that create the barrier. This makes the seal more durable. UNIVERSALLY USABLE Perfect replacement for your old door bottom seal for 3/8" doors. It can easily be trimmed to the desired length with a utility knife or hacksaw. EASY TO INSTALL Pull the old seal off the door - place the new seal below the shower door. Push up and the seal snugly clips to the glass. Done! No adhesive needed. MONEY BACK GUARANTEE With the 30 day money back guarantee and 1 year free replacement warranty, wet bathroom floors or tearing fins are a worry of the past. Add to cart now!

  • Brand: Aulett Home
  • ASIN: B07GR628FT
  • UPC: 719318362129
 - Olsa Tools | Portable Socket Organizer Tray | Red Rails with Black Clips | Holds 80 Sockets | Premium Quality Socket Holder
Olsa Tools | Portable Socket Organizer Tray | Red Rails with Black Clips | Holds 80 Sockets | Premium Quality Socket

Where is “the” socket you need when you try to find it?Are all your sockets in one spot but unorganized therefore wasting your valuable time searching for the right one? Maybe you’ve just lost them? Whatever your situation, you do not have to be unprepared. The Olsa Tools 80 Pc Socket Tray System holds up to 80 sockets (20 x 1/4" drive, 30 x 3/8" drive, 30 x 1/2" drive) so that you never lose your sockets again! It also allows for a quick find of “the” socket you need when you need it! Holds your sockets and makes it easy to put on and removeThe spring loaded ball bearing clips hold the sockets tightly in place and will keep them on holder even in upside down applications. Can be used with shallow and deep sockets. Handle makes it easy to transport the socket rack to wherever you need it. This kit includes-(1) Red Rails and Black Clips 80 Pc Socket Tray *SOCKETS NOT INCLUDEDYou can now buy Extra Clips (black) in packages of 10! Check out ASINs: B01M8KJOFY, B01M2ZGUXV, B01M5DKVDMStop losing your sockets and have them organized so you quickly find the one you need! The Olsa Tools 80 Pc Socket Tray System will hold all your sockets in placeClick the "Add to Cart" button now to get your Red Rails and BLACK Clips Olsa Tools Socket Holder Tray

  • Color: 80 Pc Red Tray/Black Clips
  • Brand: Olsa Tools
  • ASIN: B0776Z4ZTQ
  • UPC: 628055856535
 - W10350376 Dishwasher Top Rack Adjuster w/ 0.90 Inch Diameter Wheels (Redesigned for Heavy Duty Wheel Support)
W10350376 Dishwasher Top Rack Adjuster w/ 0.90 Inch Diameter Wheels (Redesigned for Heavy Duty Wheel

A group of engineers came together and redesigned the part to make it last for years of service. The prongs that hold the wheels in place was replaced with a cap. A new brand was born under Exact Appliance Parts (EAP). Part may look different in appearance but function better than the discontinued OEM part # W10350376. The W10350376 has two wheels with a diameter of 0.90 inch each. Whirlpool markets major brands: Admiral, Amana, Estate, Inglis, Jenn-Air, KitchenAid, Kirkland, MayTag, Roper, Whirlpool, and etc.

  • Brand: EAP Exact Appliance Parts
  • ASIN: B01J37BG3A
  • UPC: 617237607539
 - Kreg Tool Company - Drawer Slide Jig with Cabinet Hardware Jig and Concealed Hinge Jig - KHI-SLIDE, KHI-PULL, KHI-HINGE
Kreg Tool Company - Drawer Slide Jig with Cabinet Hardware Jig and Concealed Hinge Jig - KHI-SLIDE, KHI-PULL,

Accurate hinge positioning with built-in indexing tabs Repeatable results with built-in measuring scales  Reliable drilling with bit guide and stop collar  Simple to use with any drill—no special tools needed Adjustable cams ensure proper hinge offset Durable carbide-tipped drill bit included Strong, lightweight materials for easy handling

  • Brand: KREG
  • ASIN: B01LZ70RSU
  • UPC: 646791370122
 - 6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit - Super Smoothly and Quietly - Simple and Easy to Install - Includes Step-by-Step Instruction -Fit 36
6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit - Super Smoothly and Quietly - Simple and Easy to Install - Includes Step-by-Step Instruction -Fit 36"-40" Wide Door Panel(T

If you want to buy extra setS of T-Shape Hanger to install more doors, Please buy our T-Shape Hanger( ASIN: B01N3QMT2W Listing Link: https://www.amazon.com/dp/B01N3QMT2W ) ,This T-Shape hanger is compatibale with our T-Shape sliding door hardware kit. ATTENTION: The package of this hardware set is about 6.6FT, if there is any part missing during the ship, please connect with us and we will ship missing part to you as soon as possible. This new SMARTSTANDARD Country Black Steel sliding barn door hardware set is Beautiful and Affordable, with this state of the art equipment, you can install the appropriate sliders that is needed to have the door do a horizontal slide to open and close, as opposed to a conventional swinging door, this is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way. Brand: SMARTSTANDARD Visit the desk after your purchase to choose a special door for your installation. Please let me know if you have any questions. I want make sure you fully understand how the door works before you buy. Thank you!

  • Color: Black
  • Brand: SMARTSTANDARD
  • ASIN: B071W14W97
 - Rubbermaid 1784454 FastTrack 2-Handle Hook (S Hook)
Rubbermaid 1784454 FastTrack 2-Handle Hook (S

  • Color: Metallic|powder-coated Steel
  • Brand: Rubbermaid
  • ASIN: B0009J5NV8
  • UPC: 071691230229
 - Prime-Line D 1579-1 Sliding Door Repair Track - Repair Worn or Damaged Sliding Glass Door Aluminum Tracks and Horizontal Sliding Window Tracks, 1/4
Prime-Line D 1579-1 Sliding Door Repair Track - Repair Worn or Damaged Sliding Glass Door Aluminum Tracks and Horizontal Sliding Window Tracks, 1/4" x 8', Stainless

This stainless steel patio door track cover can be used to repair worn or damaged sliding glass door aluminum tracks, making opening a tricky door a breeze. It can also be used as a repair part for horizontal sliding window tracks. Installation is quick and easy – the repair track simply snaps over the old track and is attached with silicone adhesive (not included). The patio door track cover measures ¼” wide and 8 feet long, but can be cut to any length to fit your door or window. For more information and installation tips, watch the instructional video featured on this page.

  • Brand: PRIME-LINE
  • ASIN: B00DPH7HGK
  • UPC: 049793915795
 - For Ford F150 SuperCab 5 inches Oval Side Step Nerf Bar Running Board (Chrome)
For Ford F150 SuperCab 5 inches Oval Side Step Nerf Bar Running Board

Nerf bars were originally designed to protect vehicles from lower body damage, but they have evolved to serve other purposes as well. Many truck and SUV owners want Nerf bars just for the way they look - these sleek, tubular side bars make a stylish statement on almost any rig. These Nerf bars also function as side steps, creating an easier and safer entry point into the truck / SUV.Package Included:2 x Stainless Steel Nerf Step BarsMounting BracketCompatible with:04-08 Ford F-150 Extended Cab (Super Cab)

  • Color: Chrome
  • Brand: Auto Dynasty
  • ASIN: B01H0WP3RK
 - GP Logistics SLDD7 7' Compact Folding Ladder
GP Logistics SLDD7 7' Compact Folding

This is GPL's most popular item, with homeowners, RV enthusiasts and the trades. Its light weight, folds to just 3 1/2 inches, by 4 1/2 inches by 87 inches long. The product is made of light weight aluminum with steel parts and replaceable, rubberized anti-skid feet. The product is corrosion resistant, strong and tested to be OSHA compliant for a Type II, 225lb., commercial rating. If you're short on space or just don't like to see a ladder hanging around this is the product for you. It allows the ladder to be stored out of site. It also fits in the 4 1/2 inch by 5 inch standard decorative fence post sold at most hardware stores and lumber yards. This allows mounting on truck lumber racks, inside service vans and also RV's. If you're a typical homeowner that uses a ladder only once or twice a week, this is the perfect ladder for you. It's easy to carry around minimizing the potential to bump or scratch furniture and walls. If you use the ladder for work and have to walk to job sites, you can put a shoulder strap on it (weighs just 25 lbs) and you can still carry all your tools and the ladder in one trip.

  • Color: Red
  • Brand: GP Logistics
  • ASIN: B009IJUL4O
  • UPC: 831191000278
 - Tile Cutter, 1/2 in Cap, 14 in, Yellow
Tile Cutter, 1/2 in Cap, 14 in,

The QEP 14 in. Ceramic and Porcelain Tile Cutter cuts a variety of wall and floor tiles. The solid, chrome-plated steel rails offer smooth scoring, while the welded center breaker beam and level foam side pads provide clean cuts and a level surface. This cutter also includes an adjustable rip guide designed to help make repetitive cuts in tile faster and easier.

  • Color: yellow
  • Brand: QEP
  • ASIN: B00AM1Y15M
  • UPC: 010306102148
 - Vulcan 2
Vulcan 2" x 144" Exotic Car Rim Tie Downs w/Ratchets - 3300 lbs. SWL, 4

Protect your auto from unwanted damage during transport with the Vulcan Exotic Tie-Down Straps Kit! This value set includes four 2" x 12' webbing belts, and four ratchet buckles with snap hooks.. Compared to other car hauling accessories, this tie-down set can be used on everything from common compact cars to exotic race cars to luxury SUVs. With this kit, you can secure your vehicle to the auto trailer by the axle, around the tire, or through the rim. The non-abrasive straps can be fed through the wheels and tensioned to any outboard anchor point for cars with exotic rims. This kit is ideal for use on flatbed wreckers or open car-hauling transporters. To reduce the risk of damage to the car, the Exotic Tie-Down harness has no metal parts. It is also resistant to ultraviolet light and tearing. With this product, you can be sure that your vehicle will stay in place on the deck without its paint job getting scratched. All of Vulcan's plated hardware can resist various weather elements and when used as directed this product meets the Department of Transportation's specifications and regulations. For easy and damage-free hauling, secure your vehicle with the Vulcan Exotic Tie-Down Straps Kit!

  • Color: yellow
  • Brand: Vulcan
  • ASIN: B00A7YJ59G
  • UPC: 702302969060
 - 48 Inch Manual Tile Cutter Tools for Porcelain Ceramic Floor Tile Cutter with Adjustable Laser Guide Bonus Spared Cutting Wheel
48 Inch Manual Tile Cutter Tools for Porcelain Ceramic Floor Tile Cutter with Adjustable Laser Guide Bonus Spared Cutting

Manual Tile Cutter Porcelain ToolsManual capable of cutting ceramic tiles and other similar stone materials. Equipped with infrared ray device, it's capable of precser cutting. It's essential for DIY floor and wall tile installation projects.Steel slide rail and alloy cutter wheel will make it more durable, more convenient to use Specifications: Max. Cutting Length: 48" (1200mm) Min. Cutting Width: 1.38" (35mm) Cutting Thickness: 0.24" - 0.6" (6mm - 15mm) 10mm (0.39") Rubber Sponge Compond Pads Package information: 1X Tile Cutter How to Use this tile cutter : 1.Positioning:Adjust scaleplate to expect cutting size. Hold the handle and pull sliding seat towards back seat direction. Place the tile on baseboard and align its cutting line with baseboard beam. 2. Lining:Put down handle to contact flywheel with tile surface, push the handle to draw a continuous straight line on the tile. 3. Cutting:Raise handle and pull backward gently to make lock block settled steadily on the front end of the tile. Push down with adequate force and your tile will be divided apart.1XBonus Spare Cutting Wheel

  • Color: 48 Inch
  • Brand: Seeutek
  • ASIN: B07C82MLY2
 - QEP 10630Q 24-Inch Manual Tile Cutter with Tungsten Carbide Scoring Wheel for Porcelain and Ceramic Tiles
QEP 10630Q 24-Inch Manual Tile Cutter with Tungsten Carbide Scoring Wheel for Porcelain and Ceramic

The QEP model 10630Q 24-Inch (630mm) Manual Tile Cutter is designed for both ceramic and porcelain tile. The simple score and snap process is a quick way to rip and diagonally cut tiles. The dual, chrome-plated rugged steel rails and linear ball bearing slides are designed for smooth scoring on large tiles. The wide aluminum alloy base, heavy duty rubber pads and cutting table extensions provide extra stability for larger, heavier tiles. The high leverage bicycle grip handle makes cutting easier. Includes a 7/8-Inch titanium-coated tungsten-carbide scoring wheel.

  • Brand: QEP
  • ASIN: B008O0W7RC
  • UPC: 787721472735
 - Extra Heavy Duty White Aluminum Drop Ceiling Hooks, One Piece Ceiling Grid Clips - 10 Pack
Extra Heavy Duty White Aluminum Drop Ceiling Hooks, One Piece Ceiling Grid Clips - 10

  • Color: White
  • Brand: STORE FIXTURES DIRECT
  • ASIN: B0786P5C5Z
 - 4 Axle Strap Tie Downs 24
4 Axle Strap Tie Downs 24" Long and 4 Ratchet Tow Straps Car

    One 4 Pack of 2" x 24" axle straps with stamped d-rings and one 4 pack of 2" x 8' axle straps with ratchets. Each axle strap assembly includes 2 heavy duty stamped d-rings. Each ratchet strap assembly includes 2 twisted snap hooks, one heavy duty ratchet, one 2" d-ring, and one adjusting ring. The adjusting ring allows you to tighten and set the d-ring to the desired location on the strap. Each tie down strap is made from a high strength, 12,000lb polyester webbing and includes a 2" protection sleeve to help keep the strap from wear and tear. Each assembly has a Safety Working Load Limit (WLL) of 3,333 lbs and a Breaking Strength (BS) of 10,000 lbs. We highly recommend using one axle strap per tire when hauling vehicles as a safety precaution. Strap color may vary, please contact us first if color is important.    We always recommend reading the safety information prior to use of any of our cargo control products. When used incorrectly, any cargo control device can be unsafe and even dangerous to you or others on the road around you. Ensure that all buckles, cams, and ratchets are closed and in locked positions while in use. The strength of any webbing material is significantly reduced when it is twisted or not in a straight line. Always avoid sharp edges, use corner ...

  • Color: Blue
  • Brand: GPD
  • ASIN: B00BT0JJAM
  • UPC: 842995131389
 - Astro Pneumatic Tool 78215 Metric 1/2
Astro Pneumatic Tool 78215 Metric 1/2" Drive Low Profile Nano Impact Sockets (15

The Astro 78215 15pc 1/2" drive nano impact sockets – metric are made from a precision Broached forged CR-MO. At 1.10" (28mm) long, these top quality sockets are 37% shorter than standard shallow impact sockets and 15% shorter than other stubby impact sockets. All of the sockets feature a 7/8” (22mm) outside hex for increased access when used with a wrench.

  • Brand: Astro Pneumatic Tool
  • ASIN: B01JBIQHW6
  • UPC: 745227025787
 - 48
48" ALUMINUM MITER T-TRACK WITH MITER T- BAR by Peachtree Woodworking -

The Peachtree Miter T Track and T-bar Combo Set is one of the most versatile track sets you will ever buy. Ideal for shop built router tables, band saws, drill presses and much more. The Miter T Track accepts a standard 3/4" x 3/8" miter gauge bar. Most miter gauges have a t-bracket or disc on the end to prevent accidentally lifting out of the miter slot when in use. Our Miter T Track will accept most miter gauges with the t-bracket or disc as well. This makes the Miter T Track unique all by itself. Throw in the T-bar and your possibilities are almost limitless! The T-bar slides smoothly into the Miter T Track. This gives you the ability to create jigs and fixtures of most any kind. You can create fixtures for your feather boards, stop blocks, hold downs and more. Not only does the T-Bar work with the Miter T Track, it will also slide into the miter T slot of most table saws for building all types of sliding sleds or fixtures. Our Miter T track & T-bar are made 100% in the USA and come with full installation instructions.The Miter T Track and T-bar measures appx. 48" (length is approximate and may slightly vary).

  • Brand: Peachtree Woodworking Supply
  • ASIN: B000KV14PY
  • UPC: 810948012276
 - EaseLife 10 FT Double Door Top Mount Modern Sliding Door Hardware Track Kit | Stainless Steel | Anti-Rust| Slide Smooth Quiet | Easy Install | Fit Double 30
EaseLife 10 FT Double Door Top Mount Modern Sliding Door Hardware Track Kit | Stainless Steel | Anti-Rust| Slide Smooth Quiet | Easy Install | Fit Double 30" Wide Door

Feature Tips      1: Large range thickness door panel avaiable: 1 3/16" - 1 3/4" (30mm-45mm) thickness door panel      2: Fit for one door panel width up to 60".      3: Door weight capacity: per door 175lb, 350lb total.      4: the spacer between the top of the door and the ceiling need at least 6" for installation      5: All necessary hardware is included as you see in the pictures,only not include door. FAQ      Q: How long track do I need      A: the track length need at least twice of the door panel width , a bit longer would be better      Q: Can I cut the track myself      A: yes, you can cut the track yourself to meet your need .      Q: Can I purchase two kits then connect the two rails as a longer rail myself      A: yes , please send us message so that we can provide the extra rail connector. they will seem like one whole rail      Q: How to clearance the door frame      A: Attach a wooden board with the same thickness as your frame into your studs first, and then mount the rail onto the wooden board.      Q: Does the spoked wheel turn as the door moves or is it stationary?      A: It's stationary for decorative effect

  • Color: Silver
  • Brand: EaseLife
  • ASIN: B076HB3ZJS
  • UPC: 711176257869
 - Johnson Hardware Sliding Door/Pocket Door Hanger Ball Bearing 1125 - 1 Inch Wheel, 200 lb Capacity
Johnson Hardware Sliding Door/Pocket Door Hanger Ball Bearing 1125 - 1 Inch Wheel, 200 lb

Johnson Hardware Sliding Door/Pocket Door Hanger Ball Bearing model 1125. Features 1 Inch wheel diameter, 200 lb Capacity.

  • Color: N/A
  • Brand: Johnson Hardware
  • ASIN: B000KL282C
  • UPC: 086073112505
 - Metafile Complete Set Cream by Blum
Metafile Complete Set Cream by

Complete Set includes: (2) 22" rail, (2) 22" rail covers, (4) rail support brackets, (4) rail support covers, (8) 6x3/4" mounting screws

  • Brand: Blum
  • ASIN: B0006HFEIA
 - MaxMate Roll Up Truck Bed Tonneau Cover Works with 2004-2015 Nissan Titan | Fleetside 5.5' Bed | for Models with or Without The Utili-Track System
MaxMate Roll Up Truck Bed Tonneau Cover Works with 2004-2015 Nissan Titan | Fleetside 5.5' Bed | for Models with or Without The Utili-Track

Brand new soft roll up tonneau cover designed for easy installation and customized sleek look and made of top materials in the industry! This soft cover offers customized sleek and stylish design with easy no-drill installation and saves up to 13% in gas usage. FitmentTruck Bed: Fleetside; Bed Length: 5.5 feet; For models with or without the Utili-track System. 2004-2015 Nissan Titan; Please measure your truck bed length and make sure you have the correct model before ordering! Cab size does not matter as long as you have the correct model and bed size.

  • Color: Style: Roll Up
  • Brand: MaxMate
  • ASIN: B01M1USE7Y

Get a Great Deal on Slide Rail Kit Snap.‎

Looking for more Slide Rail Kit Snap similar ideas? Try to explore these searches: Blinker Bar, Dispenser Gasket, and Edge Mobile.


           

Snap on Tool box ball bearing Draw Rail Secondary Detents. Ez to change

Slide Rail Kit Snap

KRA series toolbox secondary ball bearing slide Detents. Mine were blown out! Old box from 2006

Tags: Snap on,Snap on toolbox,Snapon tool box,Tool bo...

Installing The Snap Lock Baluster System

Slide Rail Kit Snap

The speed, ease and elegance of the Snap Lock Baluster System will blow you away. Sideways installation is better for new construction, maintenance afterwards or retro fitting old wood 2x2 picket railings. Watch this and start thinking of all the possibilities. Another great idea from the folks ...

Tags: snap lock baluster system,snap lock balusters,b...

Snap On Drawer Slides Removal KRA Series

Slide Rail Kit Snap

via YouTube Capture

Tags: Snap On Drawer Slide Removal KRA Series,YouTube...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.