Explore deals

Turbo Shear Drill



 - Malco TSCM Corrugated Metal Turbo Shear
Malco TSCM Corrugated Metal Turbo

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

  • Color: N/A
  • Brand: Malco
  • ASIN: B00IMJDNKK
  • UPC: 686046542317
 - Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment
Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting

  • Color: NA
  • Brand: Malco
  • ASIN: B0000AQK7C
  • UPC: 686046530208
 - Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment
Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill

The Turbo shear Model TSHD1 attaches to a minimum 14.4-Volt cordless or maximum 7-Amp A/C electric drill. The driveshaft of the TSHD1 inserts directly into a 3/8-in (10 mm) or 1/2-in (12.7 mm) chuck. The cam end of the driveshaft operates an upper blade to create a smooth scissors cutting action in most common sheet metals. A telescoping drill clamp adjusts to fit length and width of any drill housing for one-hand operation. The compact, molded clamp even fits smaller lithium-ion battery powered drills. Heavy-duty gearing combines with high carbon steel blades to cut up to 18-ga (1.22 mm) automotive steel. Minimal force is required to move through a cut. The Turbo Shear Model TSHD1A1 can follow a straight line or tight left curved or square patterns. A wide jaw opening navigates cuts in auto body panels and profiles including layered metal, rocker panels and plastic bumpers. The sleek, lightweight, aluminum cast shear head and form-fitting drill clamp ensure balanced, easy control. Lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Service life of the blades is rated at 2500-ft (762 mm) minimum in 24-ga (0.61 mm) mild steel. The long-wearing blades are replaceable and easily installed on t...

  • Brand: Malco
  • ASIN: B004AHC19M
  • UPC: 686046536699
 - Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear
Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment

Turboshear metal cutting attachment Shear, heavy duty, suitable for use with: 14.4 V 3/8 in cordless or corded drill, 16 mild/18 GA cutting capacity, steel, galvanized, for ferrous and non-ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets.

  • Brand: Malco
  • ASIN: B0002894R0
  • UPC: 796084322311
 - Malco TSF2 TurboShear Fiber Cement Backer Board Shear
Malco TSF2 TurboShear Fiber Cement Backer Board

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSF2 makes cuts in 1/2" (13 mm) backer board and will also cut 5/16” fiber cement siding. Use this to make straight minimum dust cuts and arcs with the capability to navigate curves for window and door arcs! The blades are made of treated high carbon steel and feature a reversible skid plate to assure long service life. Replacement blade and skid plate TSF2RB

  • Color: NA
  • Brand: Malco
  • ASIN: B0014E9WN2
  • UPC: 686046530956
 - Malco TSHDRB Replacement Blade for Malco for TSHD Heavy Duty Sheet Metal Turbo Shear
Malco TSHDRB Replacement Blade for Malco for TSHD Heavy Duty Sheet Metal Turbo

Replacement blades for Malco TurboShear HD (Item# 199610).

  • Brand: Malco
  • ASIN: B0002894UM
  • UPC: 686046530611
 - Malco TSMD Double-Cut TurboShear Drill Attachment
Malco TSMD Double-Cut TurboShear Drill

Highlights: make your drill a double-cut metal Shear now you can get double-cut performance in a versatile Malco Turboshear fits the corded or cordless drill You already own a compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operationoptional Spacers are stored on clamp for large motor housings The clamp collar allows the shear head to be rotated 360 degree and set in any position for optimum tool clearance These blades can approach a cut from either end to produce a quality work-piece edge they can also navigate up to 90 degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams you can easily disengage the blades from the cutting path or quickly re-engage to continue cutting The long lasting carbon steel blades are also easily replaced on the job

  • Brand: Malco
  • ASIN: B016S1HRJQ
  • UPC: 686046546636
 - Malco TSDC Drill Clamp Assembly for All Turbo Shear Attachments
Malco TSDC Drill Clamp Assembly for All Turbo Shear

The drill clamp fits most 1200 rpm or larger cordless or a/c drills to make cutting with the turboshear model Ts1 a one-handed operation. Made of strong but lightweight aluminum, the rails of the TSDC drill clamp are easily attached to the Ts1 and positioned and tightened over the body of a drill. The tsce drill clamp and Ts1 turboshear combination can be repositioned upside down as required for even greater maneuverability when cutting across a large expanse of material or through mild profiles

  • Color: NA
  • Brand: Malco
  • ASIN: B0002894I4
  • UPC: 686046530550
 - Malco TSNS1 Slate Cutting Turbo Shear
Malco TSNS1 Slate Cutting Turbo

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Make your power drill a powerful slate-cutting shear! This tool is ideal for making fast straight angled or curved cuts in 4mm to 8mm natural roofing slate. Cutting the slate with finished side up produces an authentic-looking, hand-cut appearance. The padded skid plate prevents scratches to the exposed slate finish. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or rooftop. Cut thousands of linear feet of roofing slate quickly and easily all season long! Replacement blades TSNS1RB

  • Color: Aluminum, with steel blades
  • Brand: Malco
  • ASIN: B0052GQ6WI
  • UPC: 686046538907
 - Malco TSV1 Vinyl Scissors Turbo Shear
Malco TSV1 Vinyl Scissors Turbo

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Use the power assistance of your drill to make fast straight cuts, left circles and squares in popular vinyl siding styles. A knife-like beveled blade edge and easy scissor action quickly penetrates vinyl siding to start cut. Non-slip bite and 3/8 inch (9.53 mm) jaw opening tackles the lock-seam edge of siding with ease. And the wide opening jaws combined with a 3/4 inch (19.05 mm) cutting length make easy work of cutting through profiles. Malco Vinyl-Cutting TurboShears operate at high or low speeds for the control you need to follow a precise cut line. The sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp of this drill attachment allows maximum portability and ease to go wherever the work is. A lateral blade gap adjustment capability ensures that optimum cutting performance and maneuverability is maintained for the life of the blades. Heavy-duty drive components and hardened carbon steel blades offer lon...

  • Brand: Malco
  • ASIN: B00LW2T3U8
  • UPC: 686046544052
 - Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor. - 4.0 Amp Motor-360° Swivel Head for cutting curves in sheet metal-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge-Three blades work to reduce metal deformation-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel Genesis' two year warranty means you buy with confidence.

  • Brand: Genesis
  • ASIN: B01LZ7HCRC
  • UPC: 811285020665
 - Malco TSHD Heavy Duty Siding Metal Cutting Turbo Shear Drill Attachment
Malco TSHD Heavy Duty Siding Metal Cutting Turbo Shear Drill

Malco TSHD TurboShear Heavy Duty. Making your power drill a powerful metal-cutting shear is now a more attractive idea than ever before! This well tailored attachment quickly inserts into the chuck of a corded or cordless drill to make fast straight, curved or square cuts in most common sheet metals. A sleek, lightweight aluminum cast shear head and molded drill clamp allow maximum portability and ease to go wherever the work is. The compact telescoping drill clamp adjusts to fit both length and width of popular drill sizes including smaller bodied impact drivers. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360° and set in any position for optimum tool clearance when navigating profiles or to facilitate easy material flow. The shear's wide-opening jaws can operate at high or low speeds for the control you need to follow a precise trim line, navigate crosscuts through profiles of metal building and roofing panels or cut through layered metal and seams, even the ribs of spiral duct. Heavy-duty gearing and beefy, hardened carbon steel blades combine to offer up to 18-guage (1.22 mm) cutting capacity in mild steel. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability...

  • Brand: Malco
  • ASIN: B01EMO0TB4
  • UPC: 732233474920
 - DEWALT DWASHRIR Impact Ready Shears Attachment
DEWALT DWASHRIR Impact Ready Shears

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

  • Brand: DEWALT
  • ASIN: B01BSAWORC
  • UPC: 885911413749
 - Malco TSF1 Turboshear Fiber Cement Siding Shear
Malco TSF1 Turboshear Fiber Cement Siding

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Fast cutting blades are specialized for fiber cement siding only. The blades design minimizes dust. Wide skid plate design stabilizes for a precise clean cut (including window and door arches) in fiber cement siding up to 5/16” (8mm). Replacement blade TSF1RB.

  • Color: NA
  • Brand: Malco
  • ASIN: B0014EBQP4
  • UPC: 686045533941
 - Malco TSHDC EV Turboshear, Heavy Duty with Carrying Case, Black case
Malco TSHDC EV Turboshear, Heavy Duty with Carrying Case, Black

The rugged but inexpensive TurboShear HD cuts straight and to the left and makes fast cuts in material thickness up to 18-gauge galvanized steel. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. For premium performance without the premium price of a dedicated power shear, TURBOSHEAR HD is an easy addition to every tool box.

  • Color: Black case
  • Brand: Malco
  • ASIN: B005NO2QB4
  • UPC: 686046539256
 - Malco TSF1A Turboshear Pneumatic Fiber Cement Siding Shear
Malco TSF1A Turboshear Pneumatic Fiber Cement Siding

Use AIR PRESSURE for unstoppable shearing power! Combined with Malcos unique TurboShearFC Design, the TSF1A is the ultimate tool for those who want to make quick, clean cuts in fiber cement siding including window and door arches! Fast cutting blades are specialized for fiber cement siding only.

  • Brand: Malco
  • ASIN: B0014ED1TS
  • UPC: 686046533964
 - DEWALT DCS491B 20V Max 18 Gauge Swivel Head Shear (Tool Only)
DEWALT DCS491B 20V Max 18 Gauge Swivel Head Shear (Tool

The DEWALT DCS491B 20V max* 18 gauge swivel head Shears features a 360 degree tool free swivel head which allows user to access tight quarters while maintaining comfort. Cuts 7/32" strips which continuously curls out of the cutting area providing consistent and accurate cuts. Cordless Shears allows user to take the tool to the work place. Specifications: capacity (stainless steel) - 20 gauge, capacity (mild steel) - 18 gauge, strokes/min - 0-2,300 SPD, min cutting Radius - 5.5 inches. Includes: (1) 20V max* swivel head Shear bare tool. *(Tool only / battery sold separately)

  • Brand: DEWALT
  • ASIN: B01HIAWW96
  • UPC: 885911428712
 - PacTool SS204 Snapper Shear For Cutting Up To 5/16
PacTool SS204 Snapper Shear For Cutting Up To 5/16" Fiber Cement Siding, 4.8 Amp

The PacTool SS204 Snapper Shear fiber cement siding shear combines our famous precision-machined cutting head with a compact 3/8 inch drive motor. While the SS404 is geared toward the professional, the SS204 is a great lower cost alternative for the non-professional audience who is looking to side a few houses. Designed specifically for 5/16 inch fiber cement siding cutting, the solid steel blades are reversible and fully replaceable. Expected life before replacement is 20,000 linear feet, roughly 15 average houses when used appropriately. The Snapper Shear design actually shears the cement siding rather than cutting it, resulting in an OSHA compatible jobsite, less mess, minimal airborne dust and faster clean-up. This is a corded, 110 volt tool and, when used along with PacTool’s Gecko Gauges (item SA903), is a fast, efficient way to install fiber cement siding. Replacement blades set is item 40253 for straight cuts and 41253 for curved and circle cuts. PacTool is owned by General Tools - the precise tool for doing the job exactly right. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please c...

  • Brand: PacTool
  • ASIN: B001MUSY6E
  • UPC: 645646204001
 - DEWALT DCS494B 20V MAX 14ga Swivel Head Double Cut Shears (Tool Only)
DEWALT DCS494B 20V MAX 14ga Swivel Head Double Cut Shears (Tool

The DEWALT DCS494B 20V MAX* 14ga Swivel Head Double Cut Shears, Bare tool is a 360 degree tool with a free swivel head which allows user to access tight quarters while maintaining comfort. These shears can cut a 7/32" strip which continuously curls out of the cutting area providing consistent and accurate cuts. They also features an LED work light which illuminates surface areas. Cordless shears allows user to take the tool to the workplace. Capacity (stainless steel): 16ga, Capacity (mild steel): 14ga, Speed: 2,450 spm, Min cutting radius: 5 Inches. This is a bare tool times, battery sold separately. Includes: (1) DCS494 shears, (1) Hex wrench.

  • Color: Brown
  • Brand: DEWALT
  • ASIN: B011HX36GS
  • UPC: 885911462822
 - Malco TSS1 Asphalt Shingles Turbo Shear
Malco TSS1 Asphalt Shingles Turbo

Make your drill a shingle shear! Turbo Shear Model TSS1 is specialized for cutting all types of asphalt shingles. This one-hand operation accessory quickly inserts into the chuck of most cordless or corded power drills to go anywhere the work is. Make fast, clean, straight trim cuts along a roof valley, or make square cuts and circles in shingles with equal precision and ease to fit around utility outlets. A wide jaw opening with a beveled lead-in tip accommodates multiple shingle layers and a lateral blade adjustment capability makes this shear easily maneuverable in any life-rated shingle or thickness. A wide lower blade offers exceptional operator control. Heat-treated carbon steel blades with solid carbide inserts assure long cutting life. Replacement blades are also available and are easily installed at the job site.

  • Brand: Malco
  • ASIN: B00JJ6PE3Y
  • UPC: 686046534305
 - DEWALT DWMT73807 Accessory Tool Kit, 15 Piece
DEWALT DWMT73807 Accessory Tool Kit, 15

With the 15 Piece Tool Accessory Set, you can be sure you have the right tool for the job. The set includes a variety of extensions, adapters, spark plug sockets and universal joints. The sockets include DirectTorque technology to help prevent rounding of fasteners and to provide better grip.

  • Brand: DEWALT
  • ASIN: B00TI74HZK
  • UPC: 076174738070
 - Turbo Shear, Left Cut, 18 Ga Mild Steel
Turbo Shear, Left Cut, 18 Ga Mild

' Turbo Shear, Straight, Left Cutting Action, Curve Type Tight Patterns, Right Angles, Metal Gauge 18 Mild Steel 20 Galvanized 22 Stainless Steel, Steel, Installs In Chuck Of 1200 RPM Or Larger Drill Including Tight Patterns And Square Cuts '

  • Color: Silver
  • Brand: Malco
  • ASIN: B005JZMDLK
 - Turbo Shear 3/8in Power Drill Attachment Duct Work Sheet Metal Cutting Tool
Turbo Shear 3/8in Power Drill Attachment Duct Work Sheet Metal Cutting

Description: Ergonomic design for comfortable handling. Made of stainless steel that is high corrosion and wear resistance. Long service life and super durable. Specifications: Main Color:silver&red Size:15*13.8*4cm Package Size:25*19*5cmn Material:stainless steel Package included: 1 x Sheet Metal Drill Attachment

  • Brand: Mybesty
  • ASIN: B07PFJ2F7L
  • UPC: 688637873480
 - DEWALT DCS350B 20V MAX Cordless Threaded Rod Cutter (Tool Only)
DEWALT DCS350B 20V MAX Cordless Threaded Rod Cutter (Tool

The DEWALT DCS350B 20V max* cordless threaded rod Cutter is able to cut 1/4", 3/8", 1/2" mild steel coarse threaded rod, as well as 1/4", 3/8" stainless steel coarse threaded rod. Clean, Bur free cuts allowing for easy threading, with chip and spark free cutting of threaded rod. A rotating Cutter allows you to cut multiple sizes of rod with one Cutter. This Cutter has a bright LED work light to illuminate cutting area. It also features onboard Cutter wrench storage. This is a barstool item, battery sold separately. Includes: threaded rod Cutter, Cutter wrench, hang hook, four sided Cutter head.

  • Brand: DEWALT
  • ASIN: B01I254JK6
  • UPC: 885911377218
 - DEWALT DW893 12 Gauge Shear
DEWALT DW893 12 Gauge Shear

The DEWALT DW893 12 gauge high-Power shear is designed to make accurate straight or curvilinear cuts quickly and easily. The powerful 6-1/2 Amp motor generates 1,950 strokes per minute for cleaner cuts as small as one-inch radius for various applications. It will tackle up to 12 gauge mild steel and 14 gauge stainless steel applications. The heavy-duty aluminum alloy gear casing maximizes durability, and the four-edge blade design extends the life of the blade four times longer than standard blades. The DW893 is not only rugged, it's also easy to use. Its ergonomic design and convenient paddle switch allow for easy one-handed operation.

  • Color: Yellow
  • Brand: DEWALT
  • ASIN: B00004RHJ1
  • UPC: 028875008938

Get a Great Deal on Turbo Shear Drill.‎

Looking for more Turbo Shear Drill similar ideas? Try to explore these searches: Mahogany Oak Printer Stand, Glass Shapes Mosaic Tile, and Cent Obverse.


           

Malco Turbo Shear

Turbo Shear Drill

Check out the Malco Turbo Shear in this segment of Do it Yourself with Watson Metals.

Tags: DIY,Shear,Metal Roofing,power tools

Metal Cutting Turbo Sheers

Turbo Shear Drill

Click here for more info and pricing http://www.bit.ly/MalcoTools Get the job done faster with these awesome turbo sheers from Malco. They attach to your drill and have replaceable blades. Model Numbers TSHD TS1

Tags: toolbarn,toolbarn.com,tool,barn,sales,accessori...

The Malco TSMD TurboShear Double-Cut Metal Shear Drill Attachment

Turbo Shear Drill

Visit http://www.smarthvacproducts.com/product/tsmd-turboshear to learn more. The Malco TSMD TurboShear Drill Attachment converts a standard drill into a double-cut metal shear. The blades remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut....

Tags: malco,smart hvac products,hvac,duct,ductwork,sh...

NewDealExplorer.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or one of its affiliates.